Items open for Registration

No	Advertisement No.	Factory	Location	Items-Name	Code	Quantity
2961	SAF/MMD/EOI/VR/18-19/3/ESTVENDOR /9MM, REV, FIRDEV, STRKM	Small Arms Factory	The Executive Director Kanpur Kanpur Kanpur, Uttar Pradesh 208009	1 ) SWIVEL BUTT SUB ASSY TO DRG NO PH 11SA IN FINISHED CONDITION [Close] Description SWIVEL BUTT SUB-ASSY TO DRG.NO.PH-11SA IN FINISHED CONDITIOND.A. NO. 83/97 Specification SWIVEL BUTT SUB-ASSY TO DRG.NO.PH-11SA IN FINISHED CONDITIOND.A. NO. 83/97 Drawing no. PH-11SA Manufacturing Technology Testing / Inspection Facility	70	8000 संख्या
				2 ) SUPPORT BARREL DS CAT NO 1005 000891 IN FINISHED CONDITION FOR CARBINE 9MM [Close] Description SUPPORT BARREL DS CAT NO 1005-000891 IN FINISHED CONDITION COMPLETE. SMG 9MM CARBINE 1A1. DC (I) 26898-SA,DT.20-07-2016. Specification SUPPORT BARREL DS CAT NO 1005-000891 IN FINISHED CONDITION COMPLETE. SMG 9MM CARBINE 1A1. DC (I) 26898-SA,DT.20-07-2016. Drawing no. Manufacturing Technology Testing / Inspection Facility	70	500 संख्या
				3 ) STUD TRIGGER DRG NO.PH-2-3 IN SOFT CONDITION D.A. NO. 88/99 DT 2.7.99 [Close] Description STUD TRIGGER DRG NO.PH-2-3 IN SOFT CONDITION D.A. NO. 88/99 DT 2.7.99 Specification STUD TRIGGER DRG NO.PH-2-3 IN SOFT CONDITION D.A. NO. 88/99 DT 2.7.99 Drawing no. DRG NO.PH-2-3 Manufacturing Technology Testing / Inspection Facility	70	8000 संख्या
4 ) STUD STOP CYLINDER TO DRG NO. PH-2-2 IN FINISHED CONDITION. D.A. NO. 88/99 DT 2.7.99 [Close] Description STUD STOP CYLINDER TO DRG NO. PH-2-2 IN FINISHED CONDITION. D.A. NO. 88/99 DT 2.7.99 Specification STUD STOP CYLINDER TO DRG NO. PH-2-2 IN FINISHED CONDITION. D.A. NO. 88/99 DT 2.7.99 Drawing no. DRG NO. PH-2-2 Manufacturing Technology Testing / Inspection Facility	70	8000 संख्या
5 ) STUD REBOUND IN F/C DRG NO PHMK-III-2-5 FOR REVOLVER MK-III [Close] Description STUD REBOUND IN F/C DRG NO PHMK-III-2-5 FOR REVOLVER MK-III Specification STUD REBOUND IN F/C DRG NO PHMK-III-2-5 FOR REVOLVER MK-III Drawing no. DRG NO PHMK-III-2-5 Manufacturing Technology Testing / Inspection Facility	70	8000 संख्या
6 ) STUD HAMMER DRG NO.PH-2-4 IN SOFT CONDITION. D.A. NO. 88/99 DT 2.7.99 [Close] Description STUD HAMMER DRG NO.PH-2-4 IN SOFT CONDITION. D.A. NO. 88/99 DT 2.7.99 Specification STUD HAMMER DRG NO.PH-2-4 IN SOFT CONDITION. D.A. NO. 88/99 DT 2.7.99 Drawing no. DRG NO.PH-2-4 Manufacturing Technology Testing / Inspection Facility	70	8000 संख्या
7 ) STUD BAYONET FOR CARBINE 9 MM [Close] Description STUD BAYONET DS CAT NO-5307-000965 IN FINISHED CONDITION OF SMG 9MM CARBINE 1A1.DC(I)24785-SA-DT.26-07-2000. Specification STUD BAYONET DS CAT NO-5307-000965 IN FINISHED CONDITION OF SMG 9MM CARBINE 1A1.DC(I)24785-SA-DT.26-07-2000. Drawing no. DS CAT NO-5307-000965 Manufacturing Technology Testing / Inspection Facility	70	500 संख्या
8 ) STOP CYLINDER IN FINISHED CONDITION DRG NO PH-1-11 FOR REVOLVER D.A. NO. 29/06 DT. 03.07.06 [Close] Description STOP CYLINDER IN FINISHED CONDITION DRG NO PH-1-11 FOR REVOLVER D.A. NO. 29/06 DT. 03.07.06 Specification DRG NO PH-1-11 FOR REVOLVER D.A. NO. 29/06 DT. 03.07.06 Drawing no. Manufacturing Technology Testing / Inspection Facility	70	8000 संख्या
9 ) STEEL STRIP FOR FIRING DEVICE [Close] Description STEEL STRIP TO SPECN : BS:1449:PT:1:1983 HR 15 STEEL SIZE 3.25MM X 70MM X 1250MM FOR BAR TO DRG.NO IUX-615 FOR CI (A) KIRKEE, (IFD) Specification STEEL STRIP TO SPECN : BS:1449:PT:1:1983 HR 15 STEEL SIZE 3.25MM X 70MM X 1250MM FOR BAR TO DRG.NO IUX-615 FOR CI (A) KIRKEE, (IFD) Drawing no. Manufacturing Technology Melting & Rolling File Archived Testing / Inspection Facility Chemical & Mechanical properties as per std.given drawing Dimensional Inspection, for all dimensions given in the drawing & other Parameter which are mentioned in relevant drawing. File Archived	01	500 किलोग्राम
10 ) STEEL ROD 31+0.5/-0.0MM DIA.,IN CUT LENGTH OF 380+2.5/-0.0MM TO SPECN. JSS:9510-06-2000,REV.3 [Close] Description STEEL ROD 31+0.5/-0.0MM DIA.,IN CUT LENGTH OF 380+2.5/-0.0MM TO SPECN. JSS:9510-06-2000,REV.3 CODE REF.B IN NORMALISED CONDITION. COMPOSITION RESTRICTED: S%=0.010MAX.,P%=0.015MAX.& (S+P)%=0.022MAX. FOR RIFLE 5.56MM. FOR OTHER PARAMETERS AS PER QAI NO.: QA-1/QAI/14 Specification STEEL ROD 31+0.5/-0.0MM DIA.,IN CUT LENGTH OF 380+2.5/-0.0MM TO SPECN. JSS:9510-06-2000,REV.3 CODE REF.B IN NORMALISED CONDITION. COMPOSITION RESTRICTED: S%=0.010MAX.,P%=0.015MAX.& (S+P)%=0.022MAX. FOR RIFLE 5.56MM. FOR OTHER PARAMETERS AS PER QAI NO.: QA-1/QAI/14 Drawing no. Manufacturing Technology Testing / Inspection Facility	03	8000 किलोग्राम
11 ) STEEL RD 38MM DIA IN HOT ROLLED AND NORMALISED CONDITION TO SPECN. IS:5517 -1993, DESIGNATION 40 C8 [Close] Description STEEL RD 38MM DIA IN HOT ROLLED AND NORMALISED CONDITION TO SPECN. IS:5517 -1993, DESIGNATION 40 C8 TEST PIESE TO BE TES TED AS PER SPECIFICATION.MACRO ETCH TEST AND NMIR TEST. (LENGTH OF BAR MUST BE 300 MM.) Specification SPECN. IS:5517 -1993, DESIGNATION 40 C8 Drawing no. Manufacturing Technology Testing / Inspection Facility	01	500 किलोग्राम
12 ) STEEL RD 32MM DIA IN HOT ROLLED AND NORMALISED CONDITION TO SPECN.IS-1875-2005 DESIGNATION C8 CLASS 2 LATEST ISSUE [Close] Description STEEL RD 32MM DIA IN HOT ROLLED AND NORMALISED CONDITION TO SPECN.IS-1875-2005 DESIGNATION C8 CLASS 2 LATEST ISSUE TEST PIECE TO BE TESTED AS PER SPECN. MATERIAL SHOULD ALSO SATISF Y THE TESTS AS LAID DOWN IN THE ANNEXURE "A" NATURE "C". Specification SPECN.IS-1875-2005 DESIGNATION C8 CLASS 2 LATEST ISSUE Drawing no. Manufacturing Technology Testing / Inspection Facility	01	500 किलोग्राम
13 ) STEEL RD 32MM DIA IN HOT ROLLED AND NORMALISED CONDITION TO SPECN.IS-1875-2005 DESIGNATION C8 CLASS 2 LATEST ISSUE [Close] Description STEEL RD 32MM DIA IN HOT ROLLED AND NORMALISED CONDITION TO SPECN.IS-1875-2005 DESIGNATION C8 CLASS 2 LATEST ISSUE TEST PIECE TO BE TESTED AS PER SPECN. MATERIAL SHOULD ALSO SATISF Y THE TESTS AS LAID DOWN IN THE ANNEXURE "A" NATURE "C". Specification SPECN.IS-1875-2005 DESIGNATION C8 CLASS 2 LATEST ISSUE Drawing no. Manufacturing Technology Testing / Inspection Facility	01	500 किलोग्राम
14 ) STEEL RD 13MM DIA IN ANNEALED AND COLD DRAWN CONDITION [Close] Description STEEL RD 13MM DIA IN ANNEALED AND COLD DRAWN CONDITION TO SPECN.BS:970:PT.1:SEC-2-1983 GD 080M40 TEST PIECE TO BE TESTED AS PER SPECIFIC.MATERIAL SHOULD ALSO SATISFY THE TEST AS LAID DOWN IN THE ANNEXURE. Specification STEEL RD 13MM DIA IN ANNEALED AND COLD DRAWN CONDITION TO SPECN.BS:970:PT.1:SEC-2-1983 GD 080M40 TEST PIECE TO BE TESTED AS PER SPECIFIC.MATERIAL SHOULD ALSO SATISFY THE TEST AS LAID DOWN IN THE ANNEXURE. Drawing no. Manufacturing Technology Testing / Inspection Facility	01	8000 किलोग्राम
15 ) Steel Investment Casting for CAP for Carbine 9mm [Close] Description STEEL INVESTMENT CASTING FOR CAP TO DRG NO. SK-38702 OF 9MM CARBINE 1A1 Specification STEEL INVESTMENT CASTING FOR CAP TO DRG NO. SK-38702 OF 9MM CARBINE 1A1 Drawing no. SK-3870*2 Manufacturing Technology Testing / Inspection Facility	01	500 संख्या
16 ) ST.RD.38MM DIA IN HOTROLLED & ANNEALED COND.TO SPECN.IS:4432 -1988 DESIGNATION.13 NI 13 CR 3 LATEST ISSUE [Close] Description ST.RD.38MM DIA IN HOTROLLED & ANNEALED COND.TO SPECN.IS:4432 -1988 DESIGNATION.13 NI 13 CR 3 LATEST ISSUE TEST PIECE TO B E BLANK CARBURISED HEATTRATED & TESTED FOR COREPROPEERTIES I N ACCORDANCE W/RELEVANT CLAU.OF SPECN 'NI'SPOT TEST TO BE DO NE 100 Specification SPECN.IS:4432 -1988 DESIGNATION.13 NI 13 CR 3 LATEST ISSUE Drawing no. Manufacturing Technology Testing / Inspection Facility	04	500 किलोग्राम
17 ) ST.RD.25 MM DIA IN HOT ROLLED & ANNEALED/NORMLISED CONDTION TO SPECIFICATION BS:970.PT.1 1983 GD.605M36 [Close] Description ST.RD.25 MM DIA IN HOT ROLLED & ANNEALED/NORMLISED CONDTION TO SPECIFICATION BS:970.PT.1 1983 GD.605M36 SEC.2. SEPARATE TEST PIECES ARE TO BE HARDENED & TEMPERED TO CONDN."V" TO ACHIEVE HARDNESS293-352 HB MACRO-ETCH TEST & NMIR TEST AS P ER ANNEXURE-A NATURE-C Specification SPECIFICATION BS:970.PT.1 1983 GD.605M36 Drawing no. Manufacturing Technology Testing / Inspection Facility	02	500 किलोग्राम
18 ) ST STRIP MM FOR REVOLVER [Close] Description ST. STRIP 1.8 MM THICK X 72 MM X 1050 MM LENGTH WITH GRAINS IN LENGTH-WISE DIRECTION TO SPECN. STEEL IS:7226-1974,DESIGNATION C 40 (FOR BRACKET FRONT). Specification ST. STRIP 1.8 MM THICK X 72 MM X 1050 MM LENGTH WITH GRAINS IN LENGTH-WISE DIRECTION TO SPECN. STEEL IS:7226-1974,DESIGNATION C 40 (FOR BRACKET FRONT). Drawing no. Manufacturing Technology Testing / Inspection Facility	01	8000 किलोग्राम
19 ) ST ROUND 8 MM DIA [Close] Description ST ROUND 8.00 MM DIA. TO SPECN. BS-970 PT.IIOF 1970 GD. 708 M40 (REQD.FOR-PIN FIRING OF 9MM CARBINE) ACCEPTANCE STANDARDS:MACRO ETCH TEST AS PER ASTME381 & NMIR TEST AS PER IS:4163-82 Specification ST ROUND 8.00 MM DIA. TO SPECN. BS-970 PT.IIOF 1970 GD. 708 M40 (REQD.FOR-PIN FIRING OF 9MM CARBINE) ACCEPTANCE STANDARDS:MACRO ETCH TEST AS PER ASTME381 & NMIR TEST AS PER IS:4163-82 Drawing no. Manufacturing Technology Testing / Inspection Facility	03	500 किलोग्राम
20 ) ST FLAT SIZE 22 X 60MM [Close] Description ST FLAT SIZE 22 X 60MM IN HOT ROLLED & ANNEALED CONDITIONTO SPECIFICATION BS:970:PT 1:1983 : GD 708M40, Specification ST FLAT SIZE 22 X 60MM IN HOT ROLLED & ANNEALED CONDITIONTO SPECIFICATION BS:970:PT 1:1983 : GD 708M40, Drawing no. Manufacturing Technology Testing / Inspection Facility	01	500 किलोग्राम
21 ) SQUARE DRAWN 1 upon 4 Inch ROD FOR FIRING DEVICE [Close] Description SQUARE DRAWN ROD OF 1/4" (6.35MM) BRASS, BS, 2874:1969 CZ 122 H Specification SQUARE DRAWN ROD OF 1/4" (6.35MM) BRASS, BS, 2874:1969 CZ 122 H Drawing no. 01 Manufacturing Technology Melting & Rolling File Archived Testing / Inspection Facility Chemical & Mechanical properties as per std. given drawing. Dimensional Inspection, for all dimensions given in drawing & other parameter which are mentioned in relevant drawing File Archived	01	500 किलोग्राम
22 ) SPRING STOP DS CAT 5360 007416 FOR CARBINE 9MM [Close] Description SPRING STOP DS CAT NO 5360-007416 IN FINISHED CONDITION REQUIRED FOR 9MM MAGAZINE DC(I)NO 25057SA DT 03-07-2001 Specification SPRING STOP DS CAT NO 5360-007416 IN FINISHED CONDITION REQUIRED FOR 9MM MAGAZINE DC(I)NO 25057SA DT 03-07-2001 Drawing no. DS CAT NO 5360-007416 Manufacturing Technology Testing / Inspection Facility	70	500 संख्या
23 ) SPG STEEL WIRE 1.216 MM (18SWG) [Close] Description SPRING STEEL WIRE 18 SWG (0.048") DIA TO SPECIFICATION BS:5216-1991 GD ND-3 REQUIRED FOR SPRING MAIN OF 9MM CARBINE Specification SPRING STEEL WIRE 18 SWG (0.048") DIA TO SPECIFICATION BS:5216-1991 GD ND-3 REQUIRED FOR SPRING MAIN OF 9MM CARBINE Drawing no. Manufacturing Technology Testing / Inspection Facility	01	500 किलोग्राम
24 ) SPRING SPECIAL PURPOSE AS PER FOR FIRING DEVICE IB [Close] Description SPRING SPECIAL PURPOSE AS PER DR.NO.CQA (I)-393/5, CAT/PT.NO.5360-006713 FOR DEVICE FIRING IB Specification SPRING SPECIAL PURPOSE AS PER DR.NO.CQA (I)-393/5, CAT/PT.NO.5360-006713 FOR DEVICE FIRING IB Drawing no. DR.NO.CQA (I)-393/5, CAT/PT.NO.5360-006713 File Archived Manufacturing Technology Spring Manufacturing Machine File Archived Testing / Inspection Facility -Chemical & Mechanical properties as per std.given drawing Dimensional Inspection, for all dimensions given in the drawing & other Parameter which are mentioned in relevant drawing. File Archived	70	500 संख्या
25 ) SPRING PLUNGER DS CAT NO-5360-000787 IN FINISHED CONDITION OF SMG 9MM CARBINE 1A1.DC(I)26908-SA, DT.05-08-2016. [Close] Description SPRING PLUNGER DS CAT NO-5360-000787 IN FINISHED CONDITION OF SMG 9MM CARBINE 1A1.DC(I)26908-SA, DT.05-08-2016. Specification SPRING PLUNGER DS CAT NO-5360-000787 IN FINISHED CONDITION OF SMG 9MM CARBINE 1A1.DC(I)26908-SA, DT.05-08-2016. Drawing no. DS CAT NO-5360-000787 Manufacturing Technology Testing / Inspection Facility	70	500 संख्या
26 ) SPRING LOCKING TRIGGER MECH D S CAT NO 5360 007084 IN FINISHED CONDITION CARBINE 9MM [Close] Description SPRING LOCKING TRIGGER MECH D S CAT NO-5360-007084 IN FINISHED CONDITION OF SMG 9MM CARBINE 1A1.DC(I)26906-SA DT.03-08-16. Specification SPRING LOCKING TRIGGER MECH D S CAT NO-5360-007084 IN FINISHED CONDITION OF SMG 9MM CARBINE 1A1.DC(I)26906-SA DT.03-08-16. Drawing no. D S CAT NO-5360-007084 Manufacturing Technology Testing / Inspection Facility	70	500 संख्या
27 ) SPRING LEAF OF GRIP ASSY FOR FIRING DEVICE IB [Close] Description SPRING LEAF AS PER DRG.NO.CQA (I)-393/21, CAT./PT.NO.5340-014215 OF GRIP ASSY FOR DEVICE FIRING IB Specification SPRING LEAF AS PER DRG.NO.CQA (I)-393/21, CAT./PT.NO.5340-014215 OF GRIP ASSY FOR DEVICE FIRING IB Drawing no. DRG.NO.CQA (I)-393/21, CAT./PT.NO.5340-014215 File Archived Manufacturing Technology Forming File Archived Testing / Inspection Facility Chemical & Mechanical properties as per std.given drawing Dimensional Inspection, for all dimensions given in the drawing & other Parameter which are mentioned in relevant drawing. File Archived	70	500 संख्या
28 ) SPRING CATCH BARREL TO DRG NO PH 1 12 IN FINISHED CONDITION FOR REVOLVER [Close] Description SPRING CATCH BARREL TO DRG NO.PH-1-12 IN FINISHED CONDITION D.A.NO.- 116/03 , DT. 18-11-03 Specification SPRING CATCH BARREL TO DRG NO.PH-1-12 IN FINISHED CONDITION D.A.NO.- 116/03 , DT. 18-11-03 Drawing no. DRG NO.PH-1-12 Manufacturing Technology Testing / Inspection Facility	70	8000 संख्या
29 ) SPG CATCH MAGAZINE 5360 000789 FOR CARBINE 9MM [Close] Description SPG.CATCH MAGAZINE DS CAT NO.5360-000789 IN FINISHED CONDITION DC(I)26906-SA,DT.03-08-2016. Specification SPG.CATCH MAGAZINE DS CAT NO.5360-000789 IN FINISHED CONDITION DC(I)26906-SA,DT.03-08-2016. Drawing no. DS CAT NO.5360-000789 File Archived Manufacturing Technology Coiling : Spring manufacturing Machine File Archived Testing / Inspection Facility 1) Chemical & Mechanical properties as per std. given drawing 2) Dimensional inspection for all dimensions given in the drawing & other parameter which are mentioned in relevant drawing. File Archived	70	500 संख्या
30 ) SLING 9MM STEN MACHINE CARBINE D.S.CAT.NO. 1005-001003 MK-2/L/A-WEBBING, 55-IN LONG ADJUSTABLE WITH STEEL LOOP AND HOOK, DC(I) 26218-SA DATED 05-06-2006 [Close] Description SLING 9MM STEN MACHINE CARBINE D.S.CAT.NO. 1005-001003 MK-2/L/A-WEBBING, 55-IN LONG ADJUSTABLE WITH STEEL LOOP AND HOOK, DC(I) 26218-SA DATED 05-06-2006 Specification SLING 9MM STEN MACHINE CARBINE D.S.CAT.NO. 1005-001003 MK-2/L/A-WEBBING, 55-IN LONG ADJUSTABLE WITH STEEL LOOP AND HOOK, DC(I) 26218-SA DATED 05-06-2006 Drawing no. D.S.CAT.NO. 1005-001003 Manufacturing Technology Testing / Inspection Facility	70	500 संख्या
31 ) SILVER BRAZING FOIL 0.127MM X 25.4MM WIDE W/0 NICKLE TO SPECN. IS-2927-1975 GD. BA CU AG-10 [Close] Description SILVER BRAZING FOIL 0.127MM X 25.4MM WIDE W/0 NICKLE TO SPECN. IS-2927-1975 GD. BA CU AG-10 Specification SPECN. IS-2927-1975 GD. BA CU AG-10 Drawing no. Manufacturing Technology Testing / Inspection Facility	08	50 किलोग्राम
32 ) SILVER BRAZING ALLOY ROD 1/16 [Close] Description SILVER BRAZING ALLOY ROD 1/16" DIA W/O NICKLE TO SPECN.IS-2927-1975 GD. BA CU AG-10 Specification SILVER BRAZING ALLOY ROD 1/16" DIA W/O NICKLE TO SPECN.IS-2927-1975 GD. BA CU AG-10 Drawing no. Manufacturing Technology Testing / Inspection Facility	08	50 किलोग्राम
33 ) SILVER BRAZING ALLOY FOIL O.01 [Close] Description SILVER BRAZING ALLOY FOIL O.01"X 3" WIDE W/O NICKLE TO SPECN IS-2927-1975 GD. BA CU AG-10, Specification SILVER BRAZING ALLOY FOIL O.01"X 3" WIDE W/O NICKLE TO SPECN IS-2927-1975 GD. BA CU AG-10, Drawing no. Array [ 0 MB] Manufacturing Technology Testing / Inspection Facility	08	50 किलोग्राम
34 ) SILVER BRAZING ALLOY FOIL 0.0762MM X 25.4MM WIDEW/O NICKLE TO SPECN. IS-2927-1975 GD. BA CU AG-10 [Close] Description SILVER BRAZING ALLOY FOIL 0.0762MM X 25.4MM WIDEW/O NICKLE TO SPECN. IS-2927-1975 GD. BA CU AG-10 Specification SILVER BRAZING ALLOY FOIL 0.0762MM X 25.4MM WIDEW/O NICKLE TO SPECN. IS-2927-1975 GD. BA CU AG-10 Drawing no. Manufacturing Technology Testing / Inspection Facility	08	10 किलोग्राम
35 ) SET SCREW DSCAT NO 5305 005083 IN FINISHED CONDITION FOR CARBINE 9MM [Close] Description SET SCREW,DSCAT NO. 5305-005083 IN FINISHED CONDITION D C (I) NO.26372-SA DT.16-08-2007 Specification SET SCREW,DSCAT NO. 5305-005083 IN FINISHED CONDITION D C (I) NO.26372-SA DT.16-08-2007 Drawing no. 5305-005083 Manufacturing Technology Testing / Inspection Facility	70	500 संख्या
36 ) SECONDRY REFIND AOD VOD QUALITY STEEL ROD 46MM DIA FOR CARBINE 9MM [Close] Description SECONDRY REFIND AOD/VOD QUALITY STEEL ROD 46MM DIA CONFORMING TO THE SPECIFICTION JSS 9510-06:2012 CODE REF "B" IN HOT ROLLED ,ANNEALED AND PEELED CONDT. IN MULTIPLE OF 413MM LENGTH TEST PIECETO BE TESTED IN T-1 CONDTION.MACROET-CH TESTING TO CON IS 13015:1991 & NMIR TEST Specification SECONDRY REFIND AOD/VOD QUALITY STEEL ROD 46MM DIA CONFORMING TO THE SPECIFICTION JSS 9510-06:2012 CODE REF "B" IN HOT ROLLED ,ANNEALED AND PEELED CONDT. IN MULTIPLE OF 413MM LENGTH TEST PIECETO BE TESTED IN T-1 CONDTION.MACROET-CH TESTING TO CON IS 13015:1991 & NMIR TEST Drawing no. Manufacturing Technology Melting and rolling File Archived Testing / Inspection Facility 1) Chemical & Mechanical properties as per std. given drawing 2) Dimensional inspection for all dimensions given in the drawing & other parameter which are mentioned in relevant drawing. File Archived	03	500 संख्या
37 ) SEAT PLUNGER SPRING D S CAT NO- 1005-000833 IN FINISHED CONDITION OF SMG 9MM CARBINE 1A1.DC(I)26339-SA-DT.21-05-2007 [Close] Description SEAT PLUNGER SPRING D S CAT NO- 1005-000833 IN FINISHED CONDITION OF SMG 9MM CARBINE 1A1.DC(I)26339-SA-DT.21-05-2007 Specification SEAT PLUNGER SPRING D S CAT NO- 1005-000833 IN FINISHED CONDITION OF SMG 9MM CARBINE 1A1.DC(I)26339-SA-DT.21-05-2007 Drawing no. D S CAT NO- 1005-000833 Manufacturing Technology Testing / Inspection Facility	70	500 संख्या
38 ) SCREW STOCK IN FINISHED CONDITION REQUIRED FOR REVOLVER [Close] Description SCREW STOCK IN FINISHED CONDITION REQUIRED FOR REVOLVER MK-III DRG NO PHMK-III-1-15 D.A. NO. 17/11 DT. 23.06.11 Specification SCREW STOCK IN FINISHED CONDITION REQUIRED FOR REVOLVER MK-III DRG NO PHMK-III-1-15 D.A. NO. 17/11 DT. 23.06.11 Drawing no. DRG NO PHMK-III-1-15 Manufacturing Technology Testing / Inspection Facility	70	8000 संख्या
39 ) SCREW SPECIAL FOR FIRING DEVICE IB [Close] Description SCREW SPECIAL AS PER DRG.NO.CQA (I)-393/6,CAT/PT.NO.5305 -016657 FOR DEVIE FIRING IB Specification SCREW SPECIAL AS PER DRG.NO.CQA (I)-393/6,CAT/PT.NO.5305 -016657 FOR DEVIE FIRING IB Drawing no. DRG.NO.CQA (I)-393/6,CAT/PT.NO.5305 -016657 File Archived Manufacturing Technology Machining File Archived Testing / Inspection Facility Chemical & Mechanical properties as per Std. Given drawing Dimensional Inspection, for all dimensions given in drawing & other parameter which are mentioned in relevant drawing File Archived	70	500 संख्या
40 ) SCREW SPECIAL AS PER DRG NO CQA I 393 7 CAT PT NO 5305 016656 FOR FIRING DEVICE IB [Close] Description SCREW SPECIAL AS PER DRG.NO.CQA(I)-393/7, CAT/PT NO.5305-016656 FOR DEVICE FIRING IB Specification SCREW SPECIAL AS PER DRG.NO.CQA(I)-393/7, CAT/PT NO.5305-016656 FOR DEVICE FIRING IB Drawing no. DRG.NO.CQA(I)-393/7, CAT/PT NO.5305-016656 File Archived Manufacturing Technology Machining File Archived Testing / Inspection Facility Chemical & Mechanical properties as per std.given drawing Dimensional Inspection, for all dimensions given in the drawing & other Parameter which are mentioned in relevant drawing. File Archived	70	500 संख्या
41 ) SCREW SOCKET HEAD TO DS CAT NO 5305 005082 IN FINISHED CONDITION FOR CARBINE 9MM [Close] Description SCREW SOCKET HEAD TO DS CAT NO. 5305-005082 DC(I)26372-SA DT 16.08.07 FINISHED CONDITION Specification SCREW SOCKET HEAD TO DS CAT NO. 5305-005082 DC(I)26372-SA DT 16.08.07 FINISHED CONDITION Drawing no. DS CAT NO. 5305-005082 Manufacturing Technology Testing / Inspection Facility	70	500 संख्या
42 ) SCREW SOCKET HEAD TO DS CAT NO 5305 005082 IN FINISHED CONDITION FOR CARBINE 9MM [Close] Description SCREW SOCKET HEAD TO DS CAT NO. 5305-005082 DC(I)26372-SA DT 16.08.07 FINISHED CONDITION Specification SCREW SOCKET HEAD TO DS CAT NO. 5305-005082 DC(I)26372-SA DT 16.08.07 FINISHED CONDITION Drawing no. DS CAT NO. 5305-005082 Manufacturing Technology Testing / Inspection Facility	70	500 संख्या
43 ) SCREW SHIELD TO DRG NO PH 1 16 IN FINISHED CONDITION FOR REVOLVER [Close] Description SCREW SHIELD TO DRG NO. PH-1-16 IN FINISHED CONDITION. D.A. NO. 50/04 DT 27.5.04 Specification SCREW SHIELD TO DRG NO. PH-1-16 IN FINISHED CONDITION. D.A. NO. 50/04 DT 27.5.04 Drawing no. DRG NO. PH-1-16 File Archived Manufacturing Technology Testing / Inspection Facility	70	8000 संख्या
44 ) SCREW PLUNGER TO DRG NO PH 1 26 IN FINISHED CONDITION FOR REVOLVER [Close] Description SCREW PLUNGER TO DRG NO.PH-1-26 IN FINISHED CONDITION. D.A. NO. 06/04 DT 24.01.04 Specification SCREW PLUNGER TO DRG NO.PH-1-26 IN FINISHED CONDITION. D.A. NO. 06/04 DT 24.01.04 Drawing no. DRG NO.PH-1-26 Manufacturing Technology Testing / Inspection Facility	70	8000 संख्या
45 ) SCREW PLATE BODY IN FINISHED CONDITION REQUIRED FOR REVOLVER [Close] Description SCREW PLATE BODY IN FINISHED CONDITION REQUIRED FOR REVOLVER MK-III DRG NO PHMK-III-1-19 Specification SCREW PLATE BODY IN FINISHED CONDITION REQUIRED FOR REVOLVER MK-III DRG NO PHMK-III-1-19 Drawing no. PHMK-III-1-19 Manufacturing Technology Testing / Inspection Facility	70	8000 संख्या
46 ) SCREW PIN FIXING BARREL AND LEVER CAM DRG PH 1 17 IN SOFT CONDITION FOR REVOLVER [Close] Description SCREW PIN FIXING BARREL& LEVER CAM DRG.PH-1-17 (IN SOFT CONDITION) D.A. NO. 19/09 DT. 15.05.09 Specification SCREW PIN FIXING BARREL& LEVER CAM DRG.PH-1-17 (IN SOFT CONDITION) D.A. NO. 19/09 DT. 15.05.09 Drawing no. DRG.PH-1-17 Manufacturing Technology Testing / Inspection Facility	70	8000 संख्या
47 ) SCREW GRUB B A STEEL CONICAL POINTED DS CAT NO 5305 005079 FOR CARBINE 9MM [Close] Description SCREW GRUB B.A. STEEL CONICAL POINTED DS CAT NO.5305-005079 DC-26341-SA DATED 01-06-07 Specification SCREW GRUB B.A. STEEL CONICAL POINTED DS CAT NO.5305-005079 DC-26341-SA DATED 01-06-07 Drawing no. DS CAT NO.5305-005079 Manufacturing Technology Testing / Inspection Facility	70	500 संख्या
48 ) SCREW FIXING LEVER CAM TO DRG NO PH 1 20 IN FINISHED CONDITION [Close] Description SCREW FIXING LEVER CAM TO DRG.NO PH-1-20 IN FINISHED CONDITION. D.A. NO. 06/04 DT. 24.01.04 Specification SCREW FIXING LEVER CAM TO DRG.NO PH-1-20 IN FINISHED CONDITION. D.A. NO. 06/04 DT. 24.01.04 Drawing no. DRG.NO PH-1-20 Manufacturing Technology Testing / Inspection Facility	70	8000 संख्या
49 ) SCREW EXTERNALLY RELEIVED BODY FOR FIRING DEVICE [Close] Description SCREW EXTERNALLY RELEIVED BODY AS PER DRG.NO.CQA(I) 393/16 FOR DEVICE FIRING 1B CAT./PT.NO.5305-016659 Specification SCREW EXTERNALLY RELEIVED BODY AS PER DRG.NO.CQA(I) 393/16 FOR DEVICE FIRING 1B CAT./PT.NO.5305-016659 Drawing no. CAT./PT.NO.5305-016659 File Archived Manufacturing Technology Machining File Archived Testing / Inspection Facility 1. Chemical & Mechanical properties as per std. given drawing. 2. Dimensional inspection, for all dimensions given in the drawing & other parameter which are mentioned in relevant drawing. File Archived	70	500 संख्या
50 ) Screw catch magazine DS CAT No. 5305-005080 in finished conditon of SMG 9 MM Carbine [Close] Description AS PER DRG.DS CAT No. 5305-005080 Specification AS PER DRG.DS CAT No. 5305-005080 Drawing no. Manufacturing Technology Testing / Inspection Facility	70	500 संख्या
51 ) SCREW CATCH BARREL TO DRG NO. PH-1-13 IN FINISHED CONDITION WITHOUT HEAT TREATMENT. D.A. NO.61/08 , DT. 22-09-08 [Close] Description SCREW CATCH BARREL TO DRG NO. PH-1-13 IN FINISHED CONDITION WITHOUT HEAT TREATMENT. D.A. NO.61/08 , DT. 22-09-08 Specification SCREW CATCH BARREL TO DRG NO. PH-1-13 IN FINISHED CONDITION WITHOUT HEAT TREATMENT. D.A. NO.61/08 , DT. 22-09-08 Drawing no. DRG NO. PH-1-13 Manufacturing Technology Testing / Inspection Facility	70	8000 संख्या
52 ) SCREW CAM TO DRG NO. PH-1-28 IN FINISHED CONDITION. D.A. NO. 06/04 DT 24.01.04 [Close] Description SCREW CAM TO DRG NO. PH-1-28 IN FINISHED CONDITION. D.A. NO. 06/04 DT 24.01.04 Specification SCREW CAM TO DRG NO. PH-1-28 IN FINISHED CONDITION. D.A. NO. 06/04 DT 24.01.04 Drawing no. DRG NO. PH-1-28 Manufacturing Technology Testing / Inspection Facility	70	8000 संख्या
53 ) SCABBARD BAYONET FOR CARBINE 9MM [Close] Description SCABBARD BAYONET NO-5 MK-1,DS.CAT.NO. 1095-000057 DC(I)NO 22606-SA ,DT. 20/07/94 Specification SCABBARD BAYONET NO-5 MK-1,DS.CAT.NO. 1095-000057 DC(I)NO 22606-SA ,DT. 20/07/94 Drawing no. 1095-000057 File Archived Manufacturing Technology Testing / Inspection Facility	70	500 संख्या
54 ) SAFETY FOR REVOLVER MK III REQUIRED IN FINISHED CONDITION DRG NO PHMK III 1 23 [Close] Description SAFETY FOR REVOLVER MK-III REQUIRED IN FINISHED CONDITION DRG NO PHMK-III-1-23 Specification SAFETY FOR REVOLVER MK-III REQUIRED IN FINISHED CONDITION DRG NO PHMK-III-1-23 Drawing no. PHMK-III-1-23 Manufacturing Technology Testing / Inspection Facility	70	8000 संख्या
55 ) ROLLER ICR 1189 FOR MAGAZINE 9MM D.S.CAT NO.1005-000983 DC (I)NO.25127-SA DATED 23.09.2001 [Close] Description ROLLER ICR 1189 FOR MAGAZINE 9MM D.S.CAT NO.1005-000983 DC (I)NO.25127-SA DATED 23.09.2001 Specification ROLLER ICR 1189 FOR MAGAZINE 9MM D.S.CAT NO.1005-000983 DC (I)NO.25127-SA DATED 23.09.2001 Drawing no. .S.CAT NO.1005-000983 Manufacturing Technology Testing / Inspection Facility	70	500 संख्या
56 ) RING RETAINING CARRYING HANDLE IN FINISHED CONDITION FOR RIFLE 5 56 [Close] Description RING RETAINING CARRYING HANDLE TO DRG NO CQA(SA) SK-422 DS CAT NO 5365-165210 IN FINISHED CONDITION. DC(I) NO. 26935-SA DT. 07/09/16 Specification RING RETAINING CARRYING HANDLE TO DRG NO CQA(SA) SK-422 DS CAT NO 5365-165210 IN FINISHED CONDITION. DC(I) NO. 26935-SA DT. 07/09/16 Drawing no. DRG NO CQA(SA) SK-422 DS CAT NO 5365-165210 Manufacturing Technology Testing / Inspection Facility	70	500 संख्या
57 ) REXINE SYNTHETIC POUCH FOR REVOLVER [Close] Description REXINE (SYNTHETIC) POUCH TO DRG.NO. SK-5734R FOR KEEPINGOF CLEANING KIT OF REVOLVER .32" (7.65MM) Specification REXINE (SYNTHETIC) POUCH TO DRG.NO. SK-5734R FOR KEEPINGOF CLEANING KIT OF REVOLVER .32" (7.65MM) Drawing no. SK-5734R Manufacturing Technology Testing / Inspection Facility	71	8000 संख्या
58 ) GRIP ASSY OF REVOLVER MK-III [Close] Description REVOLVER 32(7.65MM) MK-III GRIP RIGHT SUB ASSY & GRIP LEFTSUB ASSY DRG NO PHMK-III-8SA & DRG NO PHMK-III-9SA WITHINSERT AND INSERT COUNTER SUNK TO DRG. NO. PH8-1 & PH9-1 REQUIRED FOR GRIP ASSY. OF REVOLVER MK-111 IN FINISHED CONDITION. D.A. NO. 09/11, DT. 26.04.11, Specification REVOLVER 32(7.65MM) MK-III GRIP RIGHT SUB ASSY & GRIP LEFTSUB ASSY DRG NO PHMK-III-8SA & DRG NO PHMK-III-9SA WITHINSERT AND INSERT COUNTER SUNK TO DRG. NO. PH8-1 & PH9-1 REQUIRED FOR GRIP ASSY. OF REVOLVER MK-111 IN FINISHED CONDITION. D.A. NO. 09/11, DT. 26.04.11, Drawing no. As per drqwing Manufacturing Technology Testing / Inspection Facility	70	8000 संख्या
59 ) REBOUND TRIGGER IN FINISHED COFOR REVOLVER MK III THROUGH MIM ROUTE [Close] Description REBOUND TRIGGER, DRG. NO. PHMK-III-1-32 (ALT) IN FINISHED COFOR REVOLVER MK-III,THROUGH MIM ROUTE. Specification REBOUND TRIGGER, DRG. NO. PHMK-III-1-32 (ALT) IN FINISHED COFOR REVOLVER MK-III,THROUGH MIM ROUTE. Drawing no. DRG. NO. PHMK-III-1-32 Manufacturing Technology Testing / Inspection Facility	70	8000 संख्या
60 ) REBOUND SLIDE TO DRG NO PHMK-III-1-22 IN FINISHED CONDITION REQUIRED FOR REVOVER MK-III [Close] Description REBOUND SLIDE TO DRG NO PHMK-III-1-22 IN FINISHED CONDITION REQUIRED FOR REVOVER MK-III Specification REBOUND SLIDE TO DRG NO PHMK-III-1-22 IN FINISHED CONDITION REQUIRED FOR REVOVER MK-III Drawing no. DRG NO PHMK-III-1-22 Manufacturing Technology Testing / Inspection Facility	70	8000 संख्या
61 ) RAW MATERIAL OF BARREL ST ROD 40 MM DIA TO SPEC JSS 9510 06 2012 CODE REF B T I COND [Close] Description RAW MATERIAL OF BARREL ST. ROD 40.0 MM DIA TO SPEC. JSS:95 10-06-2012 CODE REF .B. T - I COND. WITH COMPOSITION N RESTRICTION S%=0.01 MAX., P%=0.015MAX & (S+P)%=0.022MAX. NMIR TEST AS PER CLAUSE 8.3.4 & APPENDIX 'B' OF SPEC. JSS:95 10-06-2000(REV.NO.3), QUALITYAOD/VOD Specification SPEC. JSS:9510 -06-2012 CODE REF .B. T - I COND. Drawing no. Manufacturing Technology Melting & Rolling File Archived Testing / Inspection Facility as per attached document File Archived	01	500 किलोग्राम
62 ) Plunger DRG No. 1005-000832 [Close] Description As per Drg. Specification As per Drg. Drawing no. Manufacturing Technology Testing / Inspection Facility	70	500 संख्या
63 ) PLUNGER TUBE SPRING TO DS CAT NO 1005 000851 FOR CARBINE 9MM [Close] Description PLUNGER TUBE SPRING TO DRG/DS CAT NO-1005-000851 DC(I) NO. 25803-SA-DT.16/07/03 IN FINISHED CONDITION FROM SAF MATERIAL.(STEEL ROUND 13MM DIA. GD.080M40 QTY.25KG.COST RS.710/= AGAINST BANK GUARANTEE)OF 9MM CARBINE1A1 Specification PLUNGER TUBE SPRING TO DRG/DS CAT NO-1005-000851 DC(I) NO. 25803-SA-DT.16/07/03 IN FINISHED CONDITION FROM SAF MATERIAL.(STEEL ROUND 13MM DIA. GD.080M40 QTY.25KG.COST RS.710/= AGAINST BANK GUARANTEE)OF 9MM CARBINE1A1 Drawing no. DS CAT NO-1005-000851 Manufacturing Technology Testing / Inspection Facility	70	500 संख्या
64 ) PLUNGER TO DRG NO. PH-1-24 IN FINISHED CONDITION. D.A. NO.67/99 DT.-15.5.99 [Close] Description PLUNGER TO DRG NO. PH-1-24 IN FINISHED CONDITION. D.A. NO.67/99 DT.-15.5.99 Specification PLUNGER TO DRG NO. PH-1-24 IN FINISHED CONDITION. D.A. NO.67/99 DT.-15.5.99 Drawing no. PH-1-24 Manufacturing Technology Testing / Inspection Facility	70	8000 संख्या
65 ) PLUNGER PAWL FOR REVOLVER MK-III DRG NO PHMK-III-1-34 IN FINISHED CONDITION [Close] Description PLUNGER PAWL FOR REVOLVER MK-III DRG NO PHMK-III-1-34 IN FINISHED CONDITION Specification PLUNGER PAWL FOR REVOLVER MK-III DRG NO PHMK-III-1-34 IN FINISHED CONDITION Drawing no. PHMK-III-1-34 Manufacturing Technology Testing / Inspection Facility	70	8000 संख्या
66 ) PLUG FOR FIRING DEVICE 1B FOR MINE [Close] Description PLUG AS PER DRG.NO. CQA(I)393/4 FOR DEVICE FIRING 1B FOR MINE Specification PLUG AS PER DRG.NO. CQA(I)393/4 FOR DEVICE FIRING 1B FOR MINE Drawing no. DRG.NO. CQA(I)393/4 CQA1_393-4 [ 0 MB] File Archived CQA1_393-4 [ 0 MB] File Archived Manufacturing Technology Machining Moulding File Archived Testing / Inspection Facility 1-Chemical & Mechanical properties as per std.given drawing 2-Dimensional Inspection, for all dimensions given in the drawing & other Parameter which are mentioned in relevant drawing. File Archived	70	500 संख्या
67 ) Plate form Assy. In Finished Cond. DS CAT No. 1005-000978 [Close] Description AS PER DRG. Specification AS PER DRG. Drawing no. Manufacturing Technology Testing / Inspection Facility	70	500 संख्या
68 ) PLATE RIGHT DS CAT NO. 1005-000888 IN FINISHED CONDITION FOR PLATE GRIP ASSEMBLY FOR CARBINE 9 MM D C NO. 26884-SA,DT:-05/07/2016. [Close] Description PLATE RIGHT DS CAT NO. 1005-000888 IN FINISHED CONDITION FOR PLATE GRIP ASSEMBLY FOR CARBINE 9 MM D C NO. 26884-SA,DT:-05/07/2016. Specification PLATE RIGHT DS CAT NO. 1005-000888 IN FINISHED CONDITION FOR PLATE GRIP ASSEMBLY FOR CARBINE 9 MM D C NO. 26884-SA,DT:-05/07/2016. Drawing no. DS CAT NO. 1005-000888 Manufacturing Technology Testing / Inspection Facility	70	500 संख्या
69 ) PLATE RETAINER TO DS CAT NO.1005-000985 IN FINISHED CONDN. REQUIRED FOR 9MM MAGAZINE DC(I)NO 25698SA DT 16-03-2003 [Close] Description PLATE RETAINER TO DS CAT NO.1005-000985 IN FINISHED CONDN. REQUIRED FOR 9MM MAGAZINE DC(I)NO 25698SA DT 16-03-2003 Specification PLATE RETAINER TO DS CAT NO.1005-000985 IN FINISHED CONDN. REQUIRED FOR 9MM MAGAZINE DC(I)NO 25698SA DT 16-03-2003 Drawing no. DS CAT NO.1005-000985 Manufacturing Technology Testing / Inspection Facility	70	500 संख्या
70 ) PLATE LEFT DS CAT NO. 1005-000887 IN FINISHED CONDITION FOR PLATE GRIP ASSEMBLY FOR CARBINE 9 MM D C NO. 26884-SA, DT:-05/07/2016. [Close] Description PLATE LEFT DS CAT NO. 1005-000887 IN FINISHED CONDITION FOR PLATE GRIP ASSEMBLY FOR CARBINE 9 MM D C NO. 26884-SA, DT:-05/07/2016. Specification PLATE LEFT DS CAT NO. 1005-000887 IN FINISHED CONDITION FOR PLATE GRIP ASSEMBLY FOR CARBINE 9 MM D C NO. 26884-SA, DT:-05/07/2016. Drawing no. DS CAT NO. 1005-000887 Manufacturing Technology Testing / Inspection Facility	70	500 संख्या
71 ) PLATE GRIP ASSEMBLY D S CAT NO-1005-000881 IN FINISHED CONDITION OF SMG 9MM CARBINE 1A1.DC(I)25953-SA-DT. 09-06-04. [Close] Description PLATE GRIP ASSEMBLY D S CAT NO-1005-000881 IN FINISHED CONDITION OF SMG 9MM CARBINE 1A1.DC(I)25953-SA-DT. 09-06-04. Specification PLATE GRIP ASSEMBLY D S CAT NO-1005-000881 IN FINISHED CONDITION OF SMG 9MM CARBINE 1A1.DC(I)25953-SA-DT. 09-06-04. Drawing no. D S CAT NO-1005-000881 Manufacturing Technology Testing / Inspection Facility	70	500 संख्या
72 ) Plate Bottom drg .no. 1005-000977 in finished condition for Carbine 9mm [Close] Description AS PER DRG.no. 1005-000977 Specification AS PER DRG.no. 1005-000977 Drawing no. File Archived Manufacturing Technology Testing / Inspection Facility	70	500 संख्या
73 ) PLATE BODY IC OF REV MK III [Close] Description PLATE BODY (IC) FOR REVOLVER MK-III DRG NO SK-5376R1 Specification PLATE BODY (IC) FOR REVOLVER MK-III DRG NO SK-5376R1 Drawing no. DRG NO SK-5376R*1 Manufacturing Technology Testing / Inspection Facility	01	8000 संख्या
74 ) PLATE BAYONET STUD D S CAT NO-1005-000880 IN FINISHED CONDITION OF SMG 9MM CARBINE 1A1.DC(I)22976-SA-DT.24-05-95. [Close] Description PLATE BAYONET STUD D S CAT NO-1005-000880 IN FINISHED CONDITION OF SMG 9MM CARBINE 1A1.DC(I)22976-SA-DT.24-05-95. Specification PLATE BAYONET STUD D S CAT NO-1005-000880 IN FINISHED CONDITION OF SMG 9MM CARBINE 1A1.DC(I)22976-SA-DT.24-05-95. Drawing no. D S CAT NO-1005-000880 Manufacturing Technology Testing / Inspection Facility	70	500 संख्या
75 ) PLASTIC MOULDED BOX AS PER DRG.NO.SK-47452 [Close] Description PLASTIC MOULDED BOX AS PER DRG.NO.SK-47452 Specification PLASTIC MOULDED BOX AS PER DRG.NO.SK-47452 Drawing no. DRG.NO.SK-47452 Manufacturing Technology Testing / Inspection Facility	70	8000 संख्या
76 ) PIVOT BUTT TO DS CAT NO 1005 000879 IN FINISHED CONDITION FOR CARBINE 9MM [Close] Description PIVOT BUTT TO DS CAT NO.1005-000879 IN FINISHED CONDITION.DC(I) NO. 26883-SA DT.04.07.16. Specification PIVOT BUTT TO DS/CAT NO.1005-000879 IN FINISHED CONDITION.DC(I) NO. 26883-SA DT.04.07.16. Drawing no. DS CAT NO.1005-000879 File Archived Manufacturing Technology Machining File Archived Testing / Inspection Facility 1) Chemical & Mechanical propertles as per std. given drawing /Specification. 2) Dimensional inspection for all dimension & given in the drawing & other parameter which are mentioned in relevant drawing/specification. File Archived	70	500 संख्या
77 ) PIN FIRING FOR REVOLVER [Close] Description PIN-FIRING DRG.NO-PH-MK-II-1-29 IN FINISHED CONDITION OF 32"REVOLVER MK-III. Specification PIN-FIRING DRG.NO-PH-MK-II-1-29 IN FINISHED CONDITION OF 32"REVOLVER MK-III. Drawing no. DRG.NO-PH-MK-II-1-29 Manufacturing Technology Testing / Inspection Facility	70	8000 संख्या
78 ) PIN,CATCH TRIGGER & REBOUND TRIGGER DRG. NO. PH-7-3 IN FINISHED CONDITION. D.A. NO. 36/08 DT. 13-05-2008 [Close] Description PIN,CATCH TRIGGER & REBOUND TRIGGER DRG. NO. PH-7-3 IN FINISHED CONDITION. D.A. NO. 36/08 DT. 13-05-2008 Specification PIN,CATCH TRIGGER & REBOUND TRIGGER DRG. NO. PH-7-3 IN FINISHED CONDITION. D.A. NO. 36/08 DT. 13-05-2008 Drawing no. DRG. NO. PH-7-3 Manufacturing Technology Testing / Inspection Facility	70	8000 संख्या
79 ) PIN KEEP SPLIT FOR FIRING DEVICE [Close] Description PIN, KEEP SPLIT 1.19 X 12.7 (CAT. NO. GI/GA 1662). Specification PIN, KEEP SPLIT 1.19 X 12.7 (CAT. NO. GI/GA 1662). Drawing no. Manufacturing Technology Testing / Inspection Facility	70	500 संख्या
80 ) PIN SWIVEL HAMMER & CATCH HAMMER DRG NO.PH-6-5 IN FINISHED COND. D.A.NO. 84/99 , DT. 29-06-99 [Close] Description PIN SWIVEL HAMMER & CATCH HAMMER DRG NO.PH-6-5 IN FINISHED COND. D.A.NO. 84/99 , DT. 29-06-99 Specification PIN SWIVEL HAMMER & CATCH HAMMER DRG NO.PH-6-5 IN FINISHED COND. D.A.NO. 84/99 , DT. 29-06-99 Drawing no. DRG NO.PH-6-5 Manufacturing Technology Testing / Inspection Facility	70	8000 संख्या
First Prev 33 34 35 36 37 38 39 40 41 42 43 Next Last

Proceed