• AWEIL logo
  • OVRA - Centralised Online
    Vendor Registration Portal
  • Azadi ka Amrit Mahotsab

Items open for Registration

No Advertisement No. Factory Location Items-Name Code Quantity Approx Value Select
5681 ORDFYS/OFT/AVR/17-18/MMW/02 Ordnance Factory Tiruchirapalli
 The Executive Director
Tiruchirapalli
Tiruchirapalli
Tamil Nadu
620016 		1 ) CONVERSION TO FORGING TO DRG NO 62C 1004 200 C3 MATERIAL WILL BE SUPPLIED BY OFT REQD FOR CHAMBER GAS A1004

[Close]

Description
CONVERSION TO FORGING TO DRG.NO.: 62C 1004 200 C3 MATERIAL WILL BE SUPPLIED BY OFT REQD. FOR CHAMBER GAS A1004
Specification
AS PER DRG TO CONVERSION TO FORGING TO DRG.NO.: 62C 1004 200 C3 MATERIAL WILL BE SUPPLIED BY OFT REQD. FOR CHAMBER GAS A1004
Drawing no.
A1004
  • File Archived
Manufacturing Technology
  • As per OFT requirements
  • File Archived
Testing / Inspection Facility
  • As per OFT requirements
  • File Archived
 00 100 संख्या   
2 ) CONVERSION FORGING TO DRG. NO. 62C 7006 200 C3 MATERIAL WILL BE SUPPLIED BY OFT REQD. FOR SAFETY LOCKING BOLT (A7006)

[Close]

Description
"CONVERSION FORGING TO DRG. NO. 62C 7006 200 C3 MATERIAL WILL BE SUPPLIED BY OFT REQD. FOR SAFETY LOCKING BOLT (A7006) "
Specification
AS PER DRG OF "CONVERSION FORGING TO DRG. NO. 62C 7006 200 C3 MATERIAL WILL BE SUPPLIED BY OFT REQD. FOR SAFETY LOCKING BOLT (A7006) "
Drawing no.
A7006
  • File Archived
Manufacturing Technology
Testing / Inspection Facility
 00 100 संख्या   
3 ) BRACKET CATCH REAR COVER FOR 12.7 MM A/D GUN (A6020) INV.CAS TING TO DRG.NO.62C 6020 250 E3

[Close]

Description
"BRACKET CATCH REAR COVER FOR 12.7 MM A/D GUN (A6020) INV.CAS TING TO DRG.NO.62C 6020 250 E3 "
Specification
AS PER DRG OF "BRACKET CATCH REAR COVER FOR 12.7 MM A/D GUN (A6020) INV.CAS TING TO DRG.NO.62C 6020 250 E3 "
Drawing no.
A6020
  • File Archived
Manufacturing Technology
Testing / Inspection Facility
 70 100 संख्या   
4 ) CONVERSION FORGING TO DRG.NO.: 62C 6026 200 C3. MATERIAL WILL BE ISSUED BY OFT FOR PAWL FEED BELT A6026

[Close]

Description
"CONVERSION FORGING TO DRG.NO.: 62C 6026 200 C3. MATERIAL WILL BE ISSUED BY OFT FOR PAWL FEED BELT A6026 "
Specification
AS PER DRG OF "CONVERSION FORGING TO DRG.NO.: 62C 6026 200 C3. MATERIAL WILL BE ISSUED BY OFT FOR PAWL FEED BELT A6026 "
Drawing no.
A6026
  • File Archived
Manufacturing Technology
Testing / Inspection Facility
 00 100 संख्या   
5 ) INVESTMENT CASTING TO DRG No 62C 1012 250 E3 FOR FLASH HIDER

[Close]

Description
"INVESTMENT CASTING TO DRG.No.: 62C 1012 250 E3. FOR FLASH HIDER "
Specification
AS PER DRG OF "INVESTMENT CASTING TO DRG.No.: 62C 1012 250 E3. FOR FLASH HIDER "
Drawing no.
A1012
  • File Archived
Manufacturing Technology
  • As per OFT requirements
  • File Archived
Testing / Inspection Facility
  • As per OFT requirements
  • File Archived
 70 100 संख्या   
6 ) DETENT HANDLE BASE BARREL FOR 12 7 MM A D GUN A1216 INV CA STING TO DRG NO 62C 1216 250 D3

[Close]

Description
"DETENT HANDLE BASE BARREL FOR 12.7 MM A/D GUN (A1216) INV.CA STING TO DRG.NO.62C 1216 250 D3 "
Specification
AS PER DRG OF "DETENT HANDLE BASE BARREL FOR 12.7 MM A/D GUN (A1216) INV.CA STING TO DRG.NO.62C 1216 250 D3 "
Drawing no.
A1216
  • File Archived
Manufacturing Technology
  • As per OFT requirements
  • File Archived
Testing / Inspection Facility
  • As per OFT requirements
  • File Archived
 70 100 संख्या   
7 ) INVESTMENT CASTING TO DRG No 62C 1013 250 D3 SLEEVE HANDLE BASE BARREL FOR 12 7mm A D GUN A 1013

[Close]

Description
"INVESTMENT CASTING TO DRG.No.: 62C 1013 250 D3. SLEEVE HANDLE BASE BARREL FOR 12.7mm A.D. GUN. A 1013 "
Specification
AS PER DRG OF "INVESTMENT CASTING TO DRG.No.: 62C 1013 250 D3. SLEEVE HANDLE BASE BARREL FOR 12.7mm A.D. GUN. A 1013 "
Drawing no.
A1013
  • File Archived
Manufacturing Technology
  • As per OFT requirements
  • File Archived
Testing / Inspection Facility
  • As per OFT requirements
  • File Archived
 70 150 संख्या   
8 ) INV CASTING TO DRG NO 62C 1214 250 E 3 HANDLE BASE BARREL A 1214 FOR 12 7 MM AD GUN

[Close]

Description
"INV.CASTING TO DRG.NO.62C 1214 250 E 3 HANDLE BASE BARREL (A 1214) FOR 12.7 MM AD GUN. "
Specification
AS PER DRG OF "INV.CASTING TO DRG.NO.62C 1214 250 E 3 HANDLE BASE BARREL (A 1214) FOR 12.7 MM AD GUN. "
Drawing no.
A1214
  • File Archived
Manufacturing Technology
  • As per OFT requirements
  • File Archived
Testing / Inspection Facility
  • As per OFT requirements
  • File Archived
 70 100 संख्या   
5682 ORDFYS/OFT/AVR/17-18/MMW/01 Ordnance Factory Tiruchirapalli
 The Executive Director
Tiruchirapalli
Tiruchirapalli
Tamil Nadu
620016 		1 ) COVER ASSEMBLY TO DRG.No.: 2W12.000 Cb

[Close]

Description
COVER ASSEMBLY TO DRG.No.: 2W12.000 Cb
Specification
AS PER DRG TO COVER ASSEMBLY TO DRG.No.: 2W12.000 Cb
Drawing no.
2W12.000 Cb
  • File Archived
Manufacturing Technology
Testing / Inspection Facility
 42 100 संख्या   
2 ) SPTA BAG ASSY TO DRG. NO. 2A42.11.000 Cb

[Close]

Description
SPTA BAG ASSY TO DRG. NO. 2A42.11.000 Cb
Specification
AS PER DRG TO SPTA BAG ASSY TO DRG. NO. 2A42.11.000 Cb
  • File Archived
  • File Archived
  • File Archived
  • File Archived
  • File Archived
  • File Archived
  • File Archived
  • File Archived
  • File Archived
Drawing no.
2A42.11.000 Cb
  • File Archived
Manufacturing Technology
Testing / Inspection Facility
 42 100 संख्या   
3 ) PULLER MECHANICAL TO DRG NO. 2A42.10.070cb C9070

[Close]

Description
PULLER MECHANICAL TO DRG NO. 2A42.10.070cb C9070
Specification
AS PER DRG TO PULLER MECHANICAL TO DRG NO. 2A42.10.070cb C9070
  • File Archived
  • File Archived
  • File Archived
  • File Archived
  • File Archived
  • File Archived
  • File Archived
Drawing no.
C9070
  • File Archived
Manufacturing Technology
Testing / Inspection Facility
 42 100 संख्या   
4 ) BRUSH (ASSY) TO DRG.NO.2A42/INA/0547 DS.CAT.NO.7920-001892 D.C.No.: 19157-W, DATED: 07/05/2009. (C9054)

[Close]

Description
BRUSH (ASSY) TO DRG.NO.2A42/INA/0547 DS.CAT.NO.7920-001892 D.C.No.: 19157-W, DATED: 07/05/2009. (C9054)
Specification
AS PER DRG TO BRUSH (ASSY) TO DRG.NO.2A42/INA/0547 DS.CAT.NO.7920-001892 D.C.No.: 19157-W, DATED: 07/05/2009. (C9054)
  • File Archived
  • File Archived
  • File Archived
Drawing no.
C9054
  • File Archived
Manufacturing Technology
Testing / Inspection Facility
 42 100 संख्या   
5 ) DRIFT PIN TO DS CAT NO. 5120-415474 DES NO.CQA/WPN/1286 PART NO.ICM 2116 (C9045) FOR 30mm CANNON DC NO. 19175-W DT.21.12.09. FOR DC LATEST TO BE FOLLOWED.

[Close]

Description
DRIFT PIN TO DS CAT NO. 5120-415474 DES NO.CQA/WPN/1286 PART NO.ICM 2116 (C9045) FOR 30mm CANNON DC NO. 19175-W DT.21.12.09. FOR DC LATEST TO BE FOLLOWED.
Specification
AS PER DRG TO DRIFT PIN TO DS CAT NO. 5120-415474 DES NO.CQA/WPN/1286 PART NO.ICM 2116 (C9045) FOR 30mm CANNON DC NO. 19175-W DT.21.12.09. FOR DC LATEST TO BE FOLLOWED.
Drawing no.
C9045
  • File Archived
Manufacturing Technology
Testing / Inspection Facility
 70 100 संख्या   
6 ) DRIFT PIN TO DESIGN NO.CQA/WPN/1284 PART NO. ICM 2114 (C9041). REQD FOR 30mm CANNON. DS.CAT.NO.5120-409529. DC NO.19175-W DT.21.12.09. FOR DC LATEST TO BE FOLLOWED.

[Close]

Description
DRIFT PIN TO DESIGN NO.CQA/WPN/1284 PART NO. ICM 2114 (C9041). REQD FOR 30mm CANNON. DS.CAT.NO.5120-409529. DC NO.19175-W DT.21.12.09. FOR DC LATEST TO BE FOLLOWED.
Specification
AS PER DRG TO DRIFT PIN TO DESIGN NO.CQA/WPN/1284 PART NO. ICM 2114 (C9041). REQD FOR 30mm CANNON. DS.CAT.NO.5120-409529. DC NO.19175-W DT.21.12.09. FOR DC LATEST TO BE FOLLOWED.
Drawing no.
C9041
  • File Archived
Manufacturing Technology
Testing / Inspection Facility
 70 100 संख्या   
7 ) INVESTMENT CASTING TO DRG No 64C 5112 250 G3 REQUIRED FOR CONNECTING LINK RIGID DRG NO 2A42 05 112

[Close]

Physical Verification needed
Description
INVESTMENT CASTING TO DRG.No.: 64C 5112 250 G3. REQUIRED FOR CONNECTING LINK, RIGID (DRG.NO.2A42 05 112)
Specification
AS PER DRG TO INVESTMENT CASTING TO DRG.No.: 64C 5112 250 G3. REQUIRED FOR CONNECTING LINK, RIGID (DRG.NO.2A42 05 112)
  • File Archived
Drawing no.
C5112
  • File Archived
Manufacturing Technology
  • As per OFT requirements
  • File Archived
Testing / Inspection Facility
  • As per OFT requirements
  • File Archived
 42 100 संख्या   
8 ) INVESTMENT CASTING TO DRG No 64C 5111 250 K3 ALT REQUIRED FOR HANDLE TO DRG No 2A42 05 111 C5111

[Close]

Physical Verification needed
Description
INVESTMENT CASTING TO DRG.No.: 64C 5111 250 K3 ALT. REQUIRED FOR HANDLE TO DRG.No. 2A42 05 111 (C5111)
Specification
AS PER DRG TO INVESTMENT CASTING TO DRG.No.: 64C 5111 250 K3 ALT. REQUIRED FOR HANDLE TO DRG.No. 2A42 05 111 (C5111)
  • File Archived
Drawing no.
C5111
  • File Archived
Manufacturing Technology
  • As per OFT requirements
  • File Archived
Testing / Inspection Facility
  • As per OFT requirements
  • File Archived
 70 100 संख्या   
9 ) INVESTMENT CASTING TO DRG NO 64C 5089 250 G3 REQD FOR CATCH BODY TO DRG NO 2A42 05 089 C5089

[Close]

Physical Verification needed
Description
INVESTMENT CASTING TO DRG NO 64C 5089 250 G3. REQD FOR: CATCH BODY TO DRG NO 2A42.05.089 (C5089)
Specification
AS PER DRG TO INVESTMENT CASTING TO DRG NO 64C 5089 250 G3. REQD FOR: CATCH BODY TO DRG NO 2A42.05.089 (C5089)
Drawing no.
C5089
  • File Archived
Manufacturing Technology
  • As per OFT requirements
  • File Archived
Testing / Inspection Facility
  • As per OFT requirements
  • File Archived
 70 100 संख्या   
10 ) FORGING TO DRG NO 64C 5077 200 F3 REQD FOR LEVER MANUAL CONTROL TO DRG NO 2A42 05 077 C5077

[Close]

Description
FORGING TO DRG NO 64C 5077 200 F3. REQD FOR:LEVER MANUAL CONTROL TO DRG.NO. 2A42.05.077 (C5077)
Specification
AS PER DRG TO FORGING TO DRG NO 64C 5077 200 F3. REQD FOR:LEVER MANUAL CONTROL TO DRG.NO. 2A42.05.077 (C5077)
Drawing no.
C5077
  • File Archived
Manufacturing Technology
  • As per OFT requirements
  • File Archived
Testing / Inspection Facility
  • As per OFT requirements
  • File Archived
 70 100 संख्या   
11 ) CONVERSION FORGING TO DRG NO 64C 5056 200 F3 REQD FOR CONNECTING LINK RIGID TO DRG NO 2A42 05 056 C5056

[Close]

Physical Verification needed
Description
CONVERSION FORGING TO DRG. NO. 64C 5056 200 F3 REQD FOR CONNECTING LINK,RIGID TO DRG.NO. 2A42.05.056(C5056)
Specification
AS PER DRG TO CONVERSION FORGING TO DRG. NO. 64C 5056 200 F3 REQD FOR CONNECTING LINK,RIGID TO DRG.NO. 2A42.05.056(C5056)
Drawing no.
C5056
  • File Archived
Manufacturing Technology
  • As per the OFT requirements
  • File Archived
Testing / Inspection Facility
  • As per the OFT requirements
  • File Archived
 00 100 संख्या   
12 ) CONVERSION FORGING TO DRG NO 64C 5053 200 E3 REQD FOR LEVER MANUAL CONTROL TO DRG NO 2A42 05 053 C5053

[Close]

Physical Verification needed
Description
CONVERSION FORGING TO DRG. NO. 64C 5053 200 E3 REQD FOR LEVER MANUAL CONTROL TO DRG.NO.2A42.05.053 (C5053)
Specification
AS PER DRG TO CONVERSION FORGING TO DRG. NO. 64C 5053 200 E3 REQD FOR LEVER MANUAL CONTROL TO DRG.NO.2A42.05.053 (C5053)
Drawing no.
C5053
Manufacturing Technology
  • As per OFT requirements
  • File Archived
Testing / Inspection Facility
  • As per OFT requirements
  • File Archived
 00 100 संख्या   
13 ) CONVERSION TO FORGING DRG NO 64C 5048 200 E3 REQD FOR CARRIER TO DRG NO 2A42 05 048 C5048

[Close]

Physical Verification needed
Description
CONVERSION TO FORGING DRG.NO. 64C 5048 200 E3 REQD FOR CARRIER TO DRG. NO. 2A42.05.048 (C5048)
Specification
AS PER DRG TO CONVERSION TO FORGING DRG.NO. 64C 5048 200 E3 REQD FOR CARRIER TO DRG. NO. 2A42.05.048 (C5048)
Drawing no.
C5048
  • File Archived
Manufacturing Technology
  • As per OFT requirements
  • File Archived
Testing / Inspection Facility
  • As per OFT requirements
  • File Archived
 00 100 संख्या   
14 ) CONVERSION FORGING TO DRG 64C 5042 200 E3 REQUIRED FOR SEAR TO DRG NO 2A42 05 042 C5042

[Close]

Physical Verification needed
Description
CONVERSION FORGING TO DRG 64C 5042 200 E3 REQUIRED FOR SEAR TO DRG. NO. 2A42.05.042 (C5042)
Specification
AS PER DRG TO CONVERSION FORGING TO DRG 64C 5042 200 E3 REQUIRED FOR SEAR TO DRG. NO. 2A42.05.042 (C5042)
Drawing no.
C5042
  • File Archived
Manufacturing Technology
  • As per OFT requirements
  • File Archived
Testing / Inspection Facility
  • As per OFT requirements
  • File Archived
 00 100 संख्या   
15 ) INVESTMENT CASTING TO DRGNo 64C 5028 250 H3 REQD FOR CONNECTING LINK RIGID DRG No 2A42 05 028 C5028

[Close]

Description
INVESTMENT CASTING TO DRG.No.: 64C 5028 250 H3. REQD FOR CONNECTING LINK RIGID (DRG.No. 2A42.05.028) (C5028)
Specification
AS PER DRG TO INVESTMENT CASTING TO DRG.No.: 64C 5028 250 H3. REQD FOR CONNECTING LINK RIGID (DRG.No. 2A42.05.028) (C5028)
  • File Archived
Drawing no.
C5028
  • File Archived
Manufacturing Technology
  • As per OFT requirements
  • File Archived
Testing / Inspection Facility
  • As per OFT requirements
  • File Archived
 70 100 संख्या   
16 ) CONVERSION FORGING TO DRG NO 64C 5025 200 E3 REQD FOR ROCKER TO DRG NO 2A42 05 025 C5025

[Close]

Description
CONVERSION FORGING TO DRG NO. 64C 5025 200 E3 REQD FOR ROCKER TO DRG NO. 2A42.05.025 (C5025)
Specification
AS PER DRG TO CONVERSION FORGING TO DRG NO. 64C 5025 200 E3 REQD FOR ROCKER TO DRG NO. 2A42.05.025 (C5025)
Drawing no.
C5025
  • File Archived
Manufacturing Technology
  • As per OFT requirements
  • File Archived
Testing / Inspection Facility
  • As per OFT requirements
  • File Archived
 00 100 संख्या   
17 ) INVESTMENT CASTING TO DRG No 64C 5021 250 I3 REQUIRED FOR PAWL TO DRG NO 2A42 05 024 C5024

[Close]

Description
INVESTMENT CASTING TO DRG.No.: 64C 5021 250 I3. REQUIRED FOR PAWL TO DRG. NO. 2A42.05.024 (C5024).
Specification
AS PER DRG TO INVESTMENT CASTING TO DRG.No.: 64C 5021 250 I3. REQUIRED FOR PAWL TO DRG. NO. 2A42.05.024 (C5024).
  • File Archived
Drawing no.
C5024
  • File Archived
Manufacturing Technology
  • As per OFT requirements
  • File Archived
Testing / Inspection Facility
  • As per OFT requirements
  • File Archived
 70 200 संख्या   
18 ) INVESTMENT CASTING TO DRG.No.: 64C 5021 250 I3. REQUIRED FOR PAWL TO DRG. NO. 2A42.05.021 (C5021).

[Close]

Description
INVESTMENT CASTING TO DRG.No.: 64C 5021 250 I3. REQUIRED FOR PAWL TO DRG. NO. 2A42.05.021 (C5021).
Specification
AS PER DRG OF INVESTMENT CASTING TO DRG.No.: 64C 5021 250 I3. REQUIRED FOR PAWL TO DRG. NO. 2A42.05.021 (C5021).
  • File Archived
Drawing no.
C5021
  • File Archived
Manufacturing Technology
Testing / Inspection Facility
 70 200 संख्या   
19 ) FORGING TO DRG NO 64C 5015 200 E3 with firms material REQUIRED FOR FEED LEVER TO DRG NO 2A42 05 015 C5015

[Close]

Description
FORGING TO DRG NO 64C 5015 200 E3 (with firm's material) REQUIRED FOR FEED LEVER TO DRG.NO. 2A42.05.015 (C5015)
Specification
AS PER DRG OF FORGING TO DRG NO 64C 5015 200 E3 (with firm's material) REQUIRED FOR FEED LEVER TO DRG.NO. 2A42.05.015 (C5015)
Drawing no.
C5015
  • File Archived
Manufacturing Technology
  • As per OFT requirements
  • File Archived
Testing / Inspection Facility
  • As per OFT requirements
  • File Archived
 70 100 संख्या   
20 ) CONVERSION FORGING TO DRG NO 64C 5012 200 F3 REQD FOR BELL CRANK TO DRG NO 2A42 05 012 C5012

[Close]

Physical Verification needed
Description
CONVERSION FORGING TO DRG NO. 64C 5012 200 F3 REQD FOR BELL CRANK TO DRG NO. 2A42.05.012 (C5012)
Specification
AS PER DRG OF CONVERSION FORGING TO DRG NO. 64C 5012 200 F3 REQD FOR BELL CRANK TO DRG NO. 2A42.05.012 (C5012)
Drawing no.
C5012
  • File Archived
Manufacturing Technology
  • As per OFT requirements
  • File Archived
Testing / Inspection Facility
  • As per OFT requirements
  • File Archived
 00 100 संख्या   
21 ) SPACER SLEEVE TO DRG.No.2A42.04.001 (C4001) DC.No.19157-W

[Close]

Description
SPACER SLEEVE TO DRG.No.2A42.04.001 (C4001) DC.No.19157-W
Specification
AS PER DRG OF SPACER SLEEVE TO DRG.No.2A42.04.001 (C4001) DC.No.19157-W
Drawing no.
C4001
  • File Archived
Manufacturing Technology
Testing / Inspection Facility
 70 100 संख्या   
22 ) CONVERSION FORGING TO DRG NO 64C 3015 200 E3 REQD FOR BREECH BLOCK TO DRG NO 2A42 03 015 C3015

[Close]

Physical Verification needed
Description
"CONVERSION FORGING TO DRG NO 64C 3015 200 E3 REQD FOR BREECH BLOCK TO DRG NO 2A42.03.015 (C3015) "
Specification
AS PER DRG OF "CONVERSION FORGING TO DRG NO 64C 3015 200 E3 REQD FOR BREECH BLOCK TO DRG NO 2A42.03.015 (C3015) "
Drawing no.
C3015
  • File Archived
Manufacturing Technology
  • As per OFT requirements
  • File Archived
Testing / Inspection Facility
  • As per OFT requirements
  • File Archived
 00 100 संख्या   
23 ) CONVERSION FORG. TO DRG.NO. 64C 3009 200 E3 MATERIAL WILL BE SUPPLIED BY OFT. REQD FOR GAS PISTON C3009

[Close]

Description
CONVERSION FORG. TO DRG.NO. 64C 3009 200 E3 MATERIAL WILL BE SUPPLIED BY OFT. REQD FOR GAS PISTON C3009
Specification
AS PER DRG OF CONVERSION FORG. TO DRG.NO. 64C 3009 200 E3 MATERIAL WILL BE SUPPLIED BY OFT. REQD FOR GAS PISTON C3009
Drawing no.
C3009
  • File Archived
Manufacturing Technology
Testing / Inspection Facility
 00 100 संख्या   
24 ) CONVERSION FORGING TO DRG NO 64C 3006 200 D3 REQUIRED FOR EJECTOR TO DRG NO 2A4203 006 C3006

[Close]

Physical Verification needed
Description
CONVERSION FORGING TO DRG NO. 64C 3006 200 D3 REQUIRED FOR EJECTOR TO DRG. NO. 2A42.03.006 (C3006)
Specification
AS PER DRG OF CONVERSION FORGING TO DRG NO. 64C 3006 200 D3 REQUIRED FOR EJECTOR TO DRG. NO. 2A42.03.006 (C3006)
Drawing no.
C3006
  • File Archived
Manufacturing Technology
  • As per OFT requirements
  • File Archived
Testing / Inspection Facility
  • As per OFT requirements
  • File Archived
 00 200 संख्या   
25 ) CONVERSION FORGING TO DRG NO 64C 3004 200 E3 REQUIRED FOR PISTON TO DRG NO 2A42 03 004 C3004

[Close]

Physical Verification needed
Description
CONVERSION FORGING TO DRG NO 64C 3004 200 E3 REQUIRED FOR PISTON TO DRG NO 2A42.03.004 (C3004)
Specification
AS PER DRG OF CONVERSION FORGING TO DRG NO 64C 3004 200 E3 REQUIRED FOR PISTON TO DRG NO 2A42.03.004 (C3004)
Drawing no.
C3004
  • File Archived
Manufacturing Technology
  • As per OFT requirements
  • File Archived
Testing / Inspection Facility
  • As per OFT requirements
  • File Archived
 00 100 संख्या   
26 ) CONVERSION FORGING TO DRG NO 64C 3001 200 C3 REQUIRED FOR SLIDER TO DRG NO 2A42 03 001 C3001

[Close]

Physical Verification needed
Description
CONVERSION FORGING TO DRG. NO. 64C 3001 200 C3 REQUIRED FOR SLIDER TO DRG. NO. 2A42.03.001 (C3001)
Specification
AS PER DRG OF CONVERSION FORGING TO DRG. NO. 64C 3001 200 C3 REQUIRED FOR SLIDER TO DRG. NO. 2A42.03.001 (C3001)
Drawing no.
C3001
  • File Archived
Manufacturing Technology
  • As per OFT requirements
  • File Archived
Testing / Inspection Facility
  • As per OFT requirements
  • File Archived
 00 100 संख्या   
27 ) FORGING DRG 64C 2037 200 E3 FIRMS MATERIAL REQD FOR BARREL CATCH C2037

[Close]

Physical Verification needed
Description
FORGING DRG.64C 2037 200 E3. (FIRM'S MATERIAL) REQD FOR: BARREL CATCH C2037
Specification
AS PER DRG OF FORGING DRG.64C 2037 200 E3. (FIRM'S MATERIAL) REQD FOR: BARREL CATCH C2037
Drawing no.
C2037
  • File Archived
Manufacturing Technology
  • As per OFT requirements
  • File Archived
Testing / Inspection Facility
  • As per OFT requirements
  • File Archived
 70 106 संख्या   
28 ) FORGING TO DRG 64C 2035 200 D3 FIRMS MATERIAL REQD FOR C2035 GAS CYLINDER

[Close]

Description
FORGING TO DRG. 64C 2035 200 D3 (FIRM'S MATERIAL) REQD FOR C2035 GAS CYLINDER.
Specification
AS PER DRG OF IFORGING TO DRG. 64C 2035 200 D3 (FIRM'S MATERIAL) REQD FOR C2035 GAS CYLINDER.
Drawing no.
C2035
  • File Archived
Manufacturing Technology
  • As per OFT requirements
  • File Archived
Testing / Inspection Facility
  • As per OFT requirements
  • File Archived
 70 100 संख्या   
29 ) INVESTMENT CASTING TO DRG No 64C 2026 250 G3 REQUIRED FOR HOLDER TO DRG No 2A42 02 026 C2026

[Close]

Physical Verification needed
Description
INVESTMENT CASTING TO DRG.No.: 64C 2026 250 G3. REQUIRED FOR HOLDER TO DRG.No.: 2A42.02.026 (C2026).
Specification
AS PER DRG OF INVESTMENT CASTING TO DRG.No.: 64C 2026 250 G3. REQUIRED FOR HOLDER TO DRG.No.: 2A42.02.026 (C2026).
Drawing no.
C2026
  • File Archived
Manufacturing Technology
  • As per OFT requirements
  • File Archived
Testing / Inspection Facility
  • As per OFT requirements
  • File Archived
 70 100 संख्या   
30 ) CONVERSION FORG TO DRG NO 64C 2011 200 E3 WITHOUT SLOT REQD FOR ROD TO DRG NO 2A42 02 011 C2011

[Close]

Physical Verification needed
Description
CONVERSION FORG TO DRG NO 64C 2011 200 E3 WITHOUT SLOT REQD. FOR ROD TO DRG. NO. 2A42.02.011 (C2011)
Specification
AS PER DRG OF CONVERSION FORG TO DRG NO 64C 2011 200 E3 WITHOUT SLOT REQD. FOR ROD TO DRG. NO. 2A42.02.011 (C2011)
Drawing no.
C2011
  • File Archived
Manufacturing Technology
  • As per OFT requirements
  • File Archived
Testing / Inspection Facility
  • As per OFT requirements
  • File Archived
 00 100 संख्या   
31 ) CONVERSION FORGING TO DRG NO 64C 2009 200 G3 REQD FOR INNER RING TO DRG NO 2A42 02 009 C2009

[Close]

Physical Verification needed
Description
CONVERSION FORGING TO DRG NO 64C 2009 200 G3 REQD FOR: INNER RING TO DRG.NO 2A42.02.009 (C2009)
Specification
AS PER DRG OF CONVERSION FORGING TO DRG NO 64C 2009 200 G3 REQD FOR: INNER RING TO DRG.NO 2A42.02.009 (C2009)
Drawing no.
C2009
  • File Archived
Manufacturing Technology
  • As per OFT requirements
  • File Archived
Testing / Inspection Facility
  • As per OFT requirements
  • File Archived
 00 2900 संख्या   
32 ) CONVERSION FORGING TO DRG.No.: 64C 2008 200 G3 REQD FOR: OUTER RING TO DRG No.: 2A42.02.008 (C2008) RAW MATERIAL STEEL ROUND 34mm DIA WILL BE SUPPLIED BY OFT.

[Close]

Description
CONVERSION FORGING TO DRG.No.: 64C 2008 200 G3 REQD FOR: OUTER RING TO DRG No.: 2A42.02.008 (C2008) RAW MATERIAL STEEL ROUND 34mm DIA WILL BE SUPPLIED BY OFT.
Specification
AS PER DRG OF CONVERSION FORGING TO DRG.No.: 64C 2008 200 G3 REQD FOR: OUTER RING TO DRG No.: 2A42.02.008 (C2008) RAW MATERIAL STEEL ROUND 34mm DIA WILL BE SUPPLIED BY OFT.
Drawing no.
C2008
  • File Archived
Manufacturing Technology
Testing / Inspection Facility
 00 2800 संख्या   
33 ) FORGING TO DRG 64C 2007 200 E3 WITH FIRMS MATERIAL REQD FOR SEMI RING C2007

[Close]

Physical Verification needed
Description
FORGING TO DRG 64C 2007 200 E3. WITH FIRM'S MATERIAL REQD FOR: SEMI RING C2007
Specification
AS PER DRG OF FORGING TO DRG 64C 2007 200 E3. WITH FIRM'S MATERIAL REQD FOR: SEMI RING C2007
Drawing no.
C2007
  • File Archived
Manufacturing Technology
  • As per OFT requirements
  • File Archived
Testing / Inspection Facility
  • As per OFT requirements
  • File Archived
 70 53 संख्या   
34 ) BLANK BEFORE AND AFTER FORGING TO DRG. NO. TEND 2096 REQUIRED FOR SHIELD TO DRG. NO. 2A42.02.003 (C2003)

[Close]

Description
BLANK BEFORE AND AFTER FORGING TO DRG. NO. TEND 2096 REQUIRED FOR SHIELD TO DRG. NO. 2A42.02.003 (C2003)
Specification
AS PER DRG OF BLANK BEFORE AND AFTER FORGING TO DRG. NO. TEND 2096 REQUIRED FOR SHIELD TO DRG. NO. 2A42.02.003 (C2003)
Drawing no.
C2003
  • File Archived
Manufacturing Technology
Testing / Inspection Facility
 00 214 संख्या   
35 ) OPEN FORGING TO DRG NO TEND 1831 REQUIRED FOR BREECH C2001 TO DRG No 2A42 02 001 FOR IFD ONLY 30mm CANNON

[Close]

Physical Verification needed
Description
OPEN FORGING TO DRG.No.: TEND-1831* REQUIRED FOR BREECH(C2001) TO DRG.No.: 2A42 02 001 (FOR IFD ONLY) (30mm CANNON)
Specification
AS PER DRG OF OPEN FORGING TO DRG.No.: TEND-1831* REQUIRED FOR BREECH(C2001) TO DRG.No.: 2A42 02 001 (FOR IFD ONLY) (30mm CANNON)
Drawing no.
C2001
  • File Archived
Manufacturing Technology
  • As per OFT requirements
  • File Archived
Testing / Inspection Facility
  • As per OFT requirements
  • File Archived
 70 100 संख्या   
36 ) CONVERSION FORGING TO DRG NO 64C 1092 200 I3 REQUIRED FOR FRONT STRIPPER C1092 STRIP RETAINING METALLIC C1093

[Close]

Physical Verification needed
Description
CONVERSION FORGING TO DRG NO 64C 1092 200 I3 REQUIRED FOR FRONT STRIPPER C1092, STRIP RETAINING METALLIC C1093
Specification
AS PER DRG OF CONVERSION FORGING TO DRG NO 64C 1092 200 I3 REQUIRED FOR FRONT STRIPPER C1092, STRIP RETAINING METALLIC C1093
Drawing no.
C1092, C1093
Manufacturing Technology
  • As per OFT requirements
  • File Archived
Testing / Inspection Facility
  • As per OFT requirements
  • File Archived
 00 400 संख्या   
37 ) FORGING TO DRG 64C 1081 200 D3 WITH FIRMS MATERIAL REQD FOR ARM C1081

[Close]

Description
FORGING TO DRG. 64C 1081 200 D3. WITH FIRM'S MATERIAL. REQD. FOR ARM C1081.
Specification
AS PER DRG OF FORGING TO DRG. 64C 1081 200 D3. WITH FIRM'S MATERIAL. REQD. FOR ARM C1081.
Drawing no.
C1081
  • File Archived
Manufacturing Technology
  • As per OFT requirements
  • File Archived
Testing / Inspection Facility
  • As per OFT requirements
  • File Archived
 70 200 संख्या   
38 ) BLANK BEFORE AND AFTER FORGING TO DRG. NO. TEND 2097 REQUIRED FOR C1079 RIB RAW MATERIAL STEEL ROUND 56MM WILL BE SUPPLIED BY OFT

[Close]

Description
BLANK BEFORE AND AFTER FORGING TO DRG. NO. TEND 2097 REQUIRED FOR C1079 RIB RAW MATERIAL STEEL ROUND 56MM WILL BE SUPPLIED BY OFT
Specification
AS PER DRG OF BLANK BEFORE AND AFTER FORGING TO DRG. NO. TEND 2097 REQUIRED FOR C1079 RIB RAW MATERIAL STEEL ROUND 56MM WILL BE SUPPLIED BY OFT
Drawing no.
C1079
  • File Archived
Manufacturing Technology
Testing / Inspection Facility
 00 30 संख्या   
39 ) INPUT BLANK TO DRG. NO. TEND 2253 REQUIRED FOR C1077

[Close]

Description
INPUT BLANK TO DRG. NO. TEND 2253 REQUIRED FOR C1077
Specification
AS PER DRG OF INPUT BLANK TO DRG. NO. TEND 2253 REQUIRED FOR C1077
Drawing no.
C1077
  • File Archived
Manufacturing Technology
Testing / Inspection Facility
 70 212 संख्या   
40 ) CONVERSION FORGING DRG No 64C 1026 200 E3 REQUIRED FOR HOLDER C1026

[Close]

Physical Verification needed
Description
CONVERSION FORGING DRG.No. 64C 1026 200 E3 REQUIRED FOR HOLDER C1026
Specification
AS PER DRG TO CONVERSION FORGING DRG.No. 64C 1026 200 E3 REQUIRED FOR HOLDER C1026
Drawing no.
C1026
  • File Archived
Manufacturing Technology
  • As per OFT requirements
  • File Archived
Testing / Inspection Facility
  • As per OFT requirements
  • File Archived
 00 100 संख्या   
5683 RFI/OTE/ATH0720122/2017 Rifle Factory Ishapur
 The Executive Director
Ishapore
Ishapore
West Bengal
743144 		1 ) STEM BOLT BREECH TO DRG.NO.TSP-112B FOR 30-06 SPORTING RIFLE

[Close]

Description
STEM BOLT BREECH TO DRG.NO.TSP-112B (DC/RFI/NO.08C/090/10) FOR 30-06 SPORTING RIFLE
Specification
STEM BOLT BREECH TO DRG.NO.TSP-112B (DC/RFI/NO.08C/090/10) FOR 30-06 SPORTING RIFLE
Drawing no.
DRG.NO.TSP-112B
  • File Archived
Manufacturing Technology
Testing / Inspection Facility
 70 375 संख्या   
5684 RFI/OTE/ATH0720123/2017 Rifle Factory Ishapur
 The Executive Director
Ishapore
Ishapore
West Bengal
743144 		1 ) CPP HOLLOW CORRUGATED BOX TO DRG.NO.RFI SK.NO.6431*4(TO HOLD 5 NOS. RIFLE)

[Close]

Description
CPP HOLLOW CORRUGATED BOX TO DRG.NO.RFI SK.NO.6431*4(TO HOLD 5 NOS. RIFLE) FOR 30-06, 0.22", .315" SPORTING RIFLE & 12 BORE PAG.
Specification
CPP HOLLOW CORRUGATED BOX TO DRG.NO.RFI SK.NO.6431*4(TO HOLD 5 NOS. RIFLE) FOR 30-06, 0.22", .315" SPORTING RIFLE & 12 BORE PAG.
Drawing no.
DRG.NO.RFI SK.NO.6431*4
  • File Archived
Manufacturing Technology
Testing / Inspection Facility
 70 1329 संख्या   
5685 RFI/OTE/ATH0220085/2017 Rifle Factory Ishapur
 The Executive Director
Ishapore
Ishapore
West Bengal
743144 		1 ) LANYARD FOR PISTOL AUTO 9MM 1A.

[Close]

Description
LANYARD,PISTOL,OG 35-IN.DOUBLE TO SPECN.NO.E&S 3214-B(WS)/1 CLASS-'A' TO DS CAT NO.1005-001474 (DC-26237-SA(DT. 18.07.06)FOR PISTOL AUTO 9MM 1A
Specification
LANYARD,PISTOL,OG 35-IN.DOUBLE TO SPECN.NO.E&S 3214-B(WS)/1 CLASS-'A' TO DS CAT NO.1005-001474 (DC-26237-SA(DT. 18.07.06)FOR PISTOL AUTO 9MM 1A
Drawing no.
DS CAT NO.1005-001474 (DC-26237-SA(DT. 18.07.06)
  • File Archived
Manufacturing Technology
Testing / Inspection Facility
 70 12661 संख्या   
5686 RFI/OTE/ATH0220084/2017 Rifle Factory Ishapur
 The Executive Director
Ishapore
Ishapore
West Bengal
743144 		1 ) LEVER,TRIPPING

[Close]

Description
LEVER,TRIPPING TO DS CAT NO. 5340-016094 ( LT.DC- 26827 SADT.10-5-2016).MACRO ETCH TEST TO ASTME 381-84 WILL BE AS PERCOL.(C) OF SL. NO.1 OF CQA(SA) NOTE SHEET NO.1.NMIR TEST TO IS:4163-82 WILL BE AS PER COL.(C) OF SL. NO.3OF CQA(SA) NOTE SHEET NO.1
Specification
LEVER,TRIPPING TO DS CAT NO. 5340-016094 ( LT.DC- 26827 SADT.10-5-2016).MACRO ETCH TEST TO ASTME 381-84 WILL BE AS PERCOL.(C) OF SL. NO.1 OF CQA(SA) NOTE SHEET NO.1.NMIR TEST TO IS:4163-82 WILL BE AS PER COL.(C) OF SL. NO.3OF CQA(SA) NOTE SHEET NO.1
Drawing no.
DS CAT NO. 5340-016094 ( LT.DC- 26827 SADT.10-5-2016)
  • File Archived
Manufacturing Technology
Testing / Inspection Facility
 70 9494 संख्या   
5687 RFI/OTE/ATH0220083/2017 Rifle Factory Ishapur
 The Executive Director
Ishapore
Ishapore
West Bengal
743144 		1 ) I/C FOR TRIGGER

[Close]

Description
INVESTMENT CASTING FOR TRIGGER AS PER RFI SK.3651*3
Specification
INVESTMENT CASTING FOR TRIGGER AS PER RFI SK.3651*3
Drawing no.
RFI SK.3651*3
  • File Archived
Manufacturing Technology
Testing / Inspection Facility
 70 6684 संख्या   
5688 RFI/OTE/ATH0220139/2017 Rifle Factory Ishapur
 The Executive Director
Ishapore
Ishapore
West Bengal
743144 		1 ) I/C CATCH SAFETY

[Close]

Description
INVESTMENT CASTING FOR CATCH SAFETY TO RFI.SK.NO. 3571*3FOR PISTOL AUTO 9MM 1A
Specification
INVESTMENT CASTING FOR CATCH SAFETY TO RFI.SK.NO. 3571*3FOR PISTOL AUTO 9MM 1A
Drawing no.
RFI.SK.NO. 3571*3
  • File Archived
Manufacturing Technology
Testing / Inspection Facility
 70 12727 संख्या   
5689 RFI/OTE/ATH0220128/2017 Rifle Factory Ishapur
 The Executive Director
Ishapore
Ishapore
West Bengal
743144 		1 ) BLADE FORE SIGHT FOR 9MM AUTO PISTOL

[Close]

Description
BLADE FORESIGHT TO DS CAT NO. 1005-003197 to 1005-0032011005-006582 & 1005-006583 (LT. DC-26826-SA DT.06-05-16 )FOR PISTOL AUTO 9MM 1A
Specification
BLADE FORESIGHT TO DS CAT NO. 1005-003197 to 1005-0032011005-006582 & 1005-006583 (LT. DC-26826-SA DT.06-05-16 )FOR PISTOL AUTO 9MM 1A
Drawing no.
DS CAT NO. 1005-003197 to 1005-0032011005-006582 & 1005-006583 (LT. DC-26826-SA DT.06-05-16 )
  • File Archived
Manufacturing Technology
Testing / Inspection Facility
 70 13488 संख्या   
5690 RFI/OTE/ATG1920390/2017 Rifle Factory Ishapur
 The Executive Director
Ishapore
Ishapore
West Bengal
743144 		1 ) COVER & PLATE BRAZING

[Close]

Description
Cover & Plate Brazing for 7.62mm Assault Rifle (Ghaatak) as per Drg. No. AR-08-RFI
Specification
Cover & Plate Brazing for 7.62mm Assault Rifle (Ghaatak) as per Drg. No. AR-08-RFI
Drawing no.
AR-08-RFI
  • File Archived
Manufacturing Technology
Testing / Inspection Facility
 70 3788 संख्या   
5691 107/028/PV(A)/TE17-449/17-18/50 Gun and Shell Factory
 The Executive Director
Cossipore
Cossipore
Cossipore West Bengal
700002 		1 ) HAMMER TO DRG. NO. F-1321-437510-E IN FINISHED CONDITION. DC. NO. 36159-A DT.30/08/96

[Close]

Description
HAMMER TO DRG. NO. F-1321-437510-E IN FINISHED CONDITION. DC. NO. 36159-A DT.30/08/96
Specification
HAMMER TO DRG. NO. F-1321-437510-E IN FINISHED CONDITION. DC. NO. 36159-A DT.30/08/96
Drawing no.
  • File Archived
Manufacturing Technology
Testing / Inspection Facility
 63 25905 nos संख्या   
5692 RFI/OTE/ATH0220127/2017 Rifle Factory Ishapur
 The Executive Director
Ishapore
Ishapore
West Bengal
743144 		1 ) LEVER SLIDE LOCKING (SEMI FINISHED) FOR FOR PISTOL AUTO 9MM 1A.

[Close]

Description
LEVER SLIDE LOCKING BLANK AS PER RFI SK 8035*3 FOR PISTOLAUTO 9MM 1A
Specification
LEVER SLIDE LOCKING BLANK AS PER RFI SK 8035*3 FOR PISTOLAUTO 9MM 1A
Drawing no.
RFI SK 8035*3
  • File Archived
Manufacturing Technology
Testing / Inspection Facility
 70 5971 संख्या   
5693 RFI/OTE/ATH0220126/2017 Rifle Factory Ishapur
 The Executive Director
Ishapore
Ishapore
West Bengal
743144 		1 ) SEAR FOR 9MM AUTO PISTOL.

[Close]

Description
SEAR TO DS CAT NO. 1005-003172 (LT.DC-26819-SA DT.22.04.16)1)MACROETCH TEST TO ASTME 381-1984 WILL BE AS PR COL.(C) OFSL.NO.1 OF CQA(SA) NOTE SHEET NO.12)NMIR TEST TO IS:4163 WILL BE AS PER COL.(C) OF SL.NO.3 OFCQA(SA) NOTE SHEET NO.1 (FOR PISTOL AUTO 9MM 1A
Specification
SEAR TO DS CAT NO. 1005-003172 (LT.DC-26819-SA DT.22.04.16)1)MACROETCH TEST TO ASTME 381-1984 WILL BE AS PR COL.(C) OFSL.NO.1 OF CQA(SA) NOTE SHEET NO.12)NMIR TEST TO IS:4163 WILL BE AS PER COL.(C) OF SL.NO.3 OFCQA(SA) NOTE SHEET NO.1 (FOR PISTOL AUTO 9MM 1A
Drawing no.
DS CAT NO. 1005-003172 (LT.DC-26819-SA DT.22.04.16)
  • File Archived
Manufacturing Technology
Testing / Inspection Facility
 70 10866 संख्या   
5694 RFI/OTE/ATH0220102/2017 Rifle Factory Ishapur
 The Executive Director
Ishapore
Ishapore
West Bengal
743144 		1 ) I.C. PIN ARM

[Close]

Description
INVESTMENT CASTING FOR PIN ARM TO RFI SK.NO.3568*3(DC-02/02/13).FOR PISTOL AUTO 9MM 1A.
Specification
INVESTMENT CASTING FOR PIN ARM TO RFI SK.NO.3568*3(DC-02/02/13).FOR PISTOL AUTO 9MM 1A.
Drawing no.
RFI SK.NO.3568*3(DC-02/02/13)
  • File Archived
Manufacturing Technology
Testing / Inspection Facility
 70 9492 संख्या   
5695 RFI/OTE/ATH0220107/2017 Rifle Factory Ishapur
 The Executive Director
Ishapore
Ishapore
West Bengal
743144 		1 ) BODY (FINISH) FOR PISTOL AUTO 9MM 1A.

[Close]

Description
BODY TO DS CAT NO 1005-003145 (DC-26821-SA).MACRO-ETCH TEST ASTME 381-1984 WILL BE AS PER(C) OF SL.NO.1OF CQA(SA)NOTE SHT.NO.1, & NMIR TEST TO IS:4163 WILL BE ASPER COL.(C) OF SL.N
Specification
BODY TO DS CAT NO 1005-003145 (DC-26821-SA).MACRO-ETCH TEST ASTME 381-1984 WILL BE AS PER(C) OF SL.NO.1OF CQA(SA)NOTE SHT.NO.1, & NMIR TEST TO IS:4163 WILL BE ASPER COL.(C) OF SL.N
Drawing no.
  • File Archived
Manufacturing Technology
Testing / Inspection Facility
 67 994 संख्या   
5696 RFI/OTE/ATH0220100/2017 Rifle Factory Ishapur
 The Executive Director
Ishapore
Ishapore
West Bengal
743144 		1 ) SEMI FINISHED BLANK (THROUGH I.C ROUTE) OF BODY TORFI SK 10141 FOR PISTOL AUTO 9 MM 1A.

[Close]

Description
SEMI FINISHED BLANK (THROUGH I.C ROUTE) OF BODY TORFI SK 10141 FOR PISTOL AUTO 9 MM 1A.
Specification
SEMI FINISHED BLANK (THROUGH I.C ROUTE) OF BODY TORFI SK 10141 FOR PISTOL AUTO 9 MM 1A.
Drawing no.
RFI SK 10141
  • File Archived
Manufacturing Technology
Testing / Inspection Facility
 70 3150 संख्या   
5697 RFI/OTE/ATH1920099/2017 Rifle Factory Ishapur
 The Executive Director
Ishapore
Ishapore
West Bengal
743144 		1 ) POLYMAR MAGAZINE ASSEMBLY

[Close]

Description
POLYMER MAGAZINE ASSY, DRGNO.RFISK.9923ARCAL7.62X39MM,BODY MAT:FULLY REINFORCED RIBBED ST.CONT.WITH IMPACT&CRASH RES,POLY,BLACK STAINLESS ST.LOCKING LUGS BOTH FRONT&REAR FOR INCRESED MITTARY GR.DURABILITY.SPG:STAINLESS ST.CAP:30 ROUNDS.FINISH:MAT.BLACK.
Specification
POLYMER MAGAZINE ASSY, DRGNO.RFISK.9923ARCAL7.62X39MM,BODY MAT:FULLY REINFORCED RIBBED ST.CONT.WITH IMPACT&CRASH RES,POLY,BLACK STAINLESS ST.LOCKING LUGS BOTH FRONT&REAR FOR INCRESED MITTARY GR.DURABILITY.SPG:STAINLESS ST.CAP:30 ROUNDS.FINISH:MAT.BLACK
Drawing no.
RFISK.9923AR
  • File Archived
Manufacturing Technology
Testing / Inspection Facility
 70 3500 संख्या   
5698 T.E. NO. 170162FGFO Gun Carriage Factory
 The Executive Director
Jabalpur
Jabalpur
Jabalpur,Madhya Pradesh
482011 		1 ) SHIELD PLATE RIGHT TO DRG. NO. 1015-000705

[Close]

Description
SHIELD PLATE RIGHT TO DRG. NO. 1015-000705
Specification
SHIELD PLATE RIGHT TO DRG. NO. 1015-000705
Drawing no.
DRG. NO. 1015-000705
Manufacturing Technology
Testing / Inspection Facility
 90 25 संख्या   
2 ) TRAIL RIGHT WELDING TO DRG. NO. DS. CAT. NO. -1015-000756

[Close]

Description
TRAIL RIGHT WELDING TO DRG. NO. DS. CAT. NO. -1015-000756
Specification
TRAIL RIGHT WELDING TO DRG. NO. DS. CAT. NO. -1015-000756
Drawing no.
DRG. NO. DS. CAT. NO. -1015-000756
Manufacturing Technology
Testing / Inspection Facility
 90 25 संख्या   
5699 T.E. NO. 170165FGFO Gun Carriage Factory
 The Executive Director
Jabalpur
Jabalpur
Jabalpur,Madhya Pradesh
482011 		1 ) ADAPTER STRAIGHT PIPE HOSE COUPLING TO DRG. NO. 4730-006953

[Close]

Description
ADAPTER STRAIGHT PIPE HOSE COUPLING TO DRG. NO. 4730-006953
Specification
ADAPTER STRAIGHT PIPE HOSE COUPLING TO DRG. NO. 4730-006953
Drawing no.
DRG. NO. 4730-006953
Manufacturing Technology
Testing / Inspection Facility
 90 1513 संख्या   
2 ) PLUNGER LOCKING - IFL 804 SA TO DRG. NO. 1015-000724

[Close]

Description
PLUNGER LOCKING - IFL 804 SA TO DRG. NO. 1015-000724
Specification
PLUNGER LOCKING - IFL 804 SA TO DRG. NO. 1015-000724
Drawing no.
DRG. NO. 1015-000724
Manufacturing Technology
Testing / Inspection Facility
 90 121 संख्या   
5700 T.E. NO. 170163FGFO Gun Carriage Factory
 The Executive Director
Jabalpur
Jabalpur
Jabalpur,Madhya Pradesh
482011 		1 ) STAY BOTTOM RIGHT TO DRG NO 1015 000706

[Close]

Description
STAY (BOTTOM RIGHT) TO DRG. NO. 1015-000706
Specification
STAY (BOTTOM RIGHT) TO DRG. NO. 1015-000706
Drawing no.
DRG. NO. 1015-000706
Manufacturing Technology
  • STAY BOTTOM RIGHT TO DRG NO 1015 000706
  • File Archived
Testing / Inspection Facility
  • STAY BOTTOM RIGHT TO DRG NO 1015 000706
  • File Archived
 90 156 संख्या   
2 ) STAY TOP (RT) TO DRG. NO. IWP-1207/1015-000707

[Close]

Description
STAY TOP (RT) TO DRG. NO. IWP-1207/1015-000707
Specification
STAY TOP (RT) TO DRG. NO. IWP-1207/1015-000707
Drawing no.
DRG. NO. IWP-1207/1015-000707
Manufacturing Technology
Testing / Inspection Facility
 90 208 संख्या   
3 ) STAY BOTTOM LEFT TO DRG NO 1015 000695

[Close]

Description
STAY BOTTOM (LEFT) TO DRG. NO. 1015-000695
Specification
STAY BOTTOM (LEFT) TO DRG. NO. 1015-000695
Drawing no.
DRG. NO. 1015-000695
Manufacturing Technology
  • STAY BOTTOM LEFT TO DRG NO 1015 000695
  • File Archived
Testing / Inspection Facility
  • STAY BOTTOM LEFT TO DRG NO 1015 000695
  • File Archived
 90 156 संख्या   
4 ) STAY (TOP LT) D6P-160102-01 TO DRG. NO. IWP-1197/1015-000696

[Close]

Description
STAY (TOP LT) D6P-160102-01 TO DRG. NO. IWP-1197/1015-000696
Specification
STAY (TOP LT) D6P-160102-01 TO DRG. NO. IWP-1197/1015-000696
Drawing no.
DRG. NO. IWP-1197/1015-000696
Manufacturing Technology
Testing / Inspection Facility
 90 218 संख्या   
5701 SAF/MMD/EOI/VR/17-18/1/FF Small Arms Factory
 The Executive Director
Kanpur
Kanpur
Kanpur, Uttar Pradesh
208009 		1 ) MOUNTING TRIPOD 7.62MM MGL 4A1 GENERAL ARRANGEMENT TO DS CAT NO.1005-000627 DC NO. 20306-SA DT.08.03.2007 IN FINISHED CONDITION.

[Close]

Description
MOUNTING TRIPOD 7.62MM MGL 4A1 GENERAL ARRANGEMENT TO DS CAT NO.1005-000627 DC NO. 20306-SA DT.08.03.2007 IN FINISHED CONDITION.
Specification
MOUNTING TRIPOD 7.62MM MGL 4A1 GENERAL ARRANGEMENT TO DS CAT NO.1005-000627 DC NO. 20306-SA DT.08.03.2007 IN FINISHED CONDITION.
Drawing no.
DS CAT NO.1005-000627 DC NO. 20306-SA
Manufacturing Technology
Testing / Inspection Facility
 70 300 संख्या   
2 ) PIN REAR MOUNTING 7.62MM MG MK-I DS CAT NO.5315-001554 IN FINISHED CONDITION DC(I) NO 21743-SA DT.21.5.92.

[Close]

Description
PIN REAR MOUNTING 7.62MM MG MK-I DS CAT NO.5315-001554 IN FINISHED CONDITION DC(I) NO 21743-SA DT.21.5.92.
Specification
PIN REAR MOUNTING 7.62MM MG MK-I DS CAT NO.5315-001554 IN FINISHED CONDITION DC(I) NO 21743-SA DT.21.5.92.
Drawing no.
DS CAT NO.5315-001554
Manufacturing Technology
Testing / Inspection Facility
 70 600 संख्या   
3 ) WALLET SA SPARE PARTS AND TOOLS NO 2 MK 1 EMPTY

[Close]

Description
WALLET SA SPARE PARTS & TOOLS NO. 2 MK- 1(EMPTY) DS CAT NO. 1005 - 000765 DC(I) NO.25052-SA DT.28/06/2001 FINISHED CONDITION 4 SHTS.
Specification
WALLET SA SPARE PARTS & TOOLS NO. 2 MK- 1(EMPTY) DS CAT NO. 1005 - 000765 DC(I) NO.25052-SA DT.28/06/2001 FINISHED CONDITION 4 SHTS.
Drawing no.
DS CAT NO. 1005 - 000765 DC(I) NO.25052-SA
Manufacturing Technology
  • Sewings/Stitching
  • File Archived
Testing / Inspection Facility
  • Chemical & Mechanical Properties as per std. given drawing
  • Dimensional inspection, for all dimensions given in the drawing and other parameters which are mentioned in the relevant drawing
  • File Archived
 70 300 संख्या   
4 ) PEGS NIGHT LINE MG MK I

[Close]

Description
PEGS NIGHT LINE MG MK-I TO DS CAT NO.1005-000755 DC (I) NO.24576-SA DT.01.11.99 IN FINISHED CONDITION.
Specification
PEGS NIGHT LINE MG MK-I TO DS CAT NO.1005-000755 DC (I) NO.24576-SA DT.01.11.99 IN FINISHED CONDITION.
Drawing no.
DS CAT NO.1005-000755 DC (I) NO.24576-SA
  • File Archived
Manufacturing Technology
  • Machining
  • File Archived
Testing / Inspection Facility
  • 1. Chemical & Mechanical properties as per std. given drawing/specification.
  • 2. Dimensional inspection for all dimension given in the drawing & other parameter which are mentioned in relevant drawing/specification.
  • File Archived
 70 600 संख्या   
5 ) LAMP AIMING

[Close]

Description
LAMP AIMING MG MK-3 TO DS CAT NO.1005-000720 (3 SHEETS) SHT NO.1 OF 3 DC(I) NO.24588-SA DT. 22-11-99 SHT NO.2 OF 3 DC(I) NO.23618-SA DT. 16-12-96 SHT NO.3 OF 3 DC(I) NO.23590-SA DT. 26-11-96 IN FINISHED CONDITION.
Specification
LAMP AIMING MG MK-3 TO DS CAT NO.1005-000720 (3 SHEETS) SHT NO.1 OF 3 DC(I) NO.24588-SA DT. 22-11-99 SHT NO.2 OF 3 DC(I) NO.23618-SA DT. 16-12-96 SHT NO.3 OF 3 DC(I) NO.23590-SA DT. 26-11-96 IN FINISHED CONDITION.
  • File Archived
Drawing no.
DS CAT NO.1005-000720 (3 SHEETS)
  • File Archived
  • File Archived
  • File Archived
Manufacturing Technology
  • Optical Manufacturing technology
  • File Archived
Testing / Inspection Facility
  • Chemical & Mechanical Properties as per std. given drawing
  • Dimensional inspection, for all dimensions given in the drawing and other parameters which are mentioned in the relevant drawing
  • Chemical & Mechanical Properties as per std. given drawing
  • Chemical & Mechanical Properties as per std. given drawing
  • Chemical & Mechanical Properties as per std. given drawing
  • File Archived
 70 300 संख्या   
6 ) BRACKET SIGHT UNIT NO.1 MK-1 TO DS CAT NO.1005-000708 DC (I) NO.22747-SA DT.6-12-94

[Close]

Description
BRACKET SIGHT UNIT NO.1 MK-1 TO DS CAT NO.1005-000708 DC (I) NO.22747-SA DT.6-12-94
Specification
BRACKET SIGHT UNIT NO.1 MK-1 TO DS CAT NO.1005-000708 DC (I) NO.22747-SA DT.6-12-94
Drawing no.
DS CAT NO.1005-000708 DC (I) NO.22747-SA DT.6-12-94
Manufacturing Technology
Testing / Inspection Facility
 70 300 संख्या   
7 ) CASE PEGS NIGHT LINE MG MK-1 TO DS CAT NO.5140-000279 DC(I) NO.23881-SA DT.02-08-97 IN FINISHED CONDITION.

[Close]

Description
CASE PEGS NIGHT LINE MG MK-1 TO DS CAT NO.5140-000279 DC(I) NO.23881-SA DT.02-08-97 IN FINISHED CONDITION.
Specification
CASE PEGS NIGHT LINE MG MK-1 TO DS CAT NO.5140-000279 DC(I) NO.23881-SA DT.02-08-97 IN FINISHED CONDITION.
Drawing no.
DS CAT NO.5140-000279 DC(I) NO.23881-SA DT.02-08-97
Manufacturing Technology
Testing / Inspection Facility
 70 300 संख्या   
8 ) ROD CLEANING 7.62MM BARREL GAS CYLINDER 1A TO DS CAT NO.1005-000358 DC (I) NO.23088-SA DT.19-9-95 IN FINISHED CONDITION.

[Close]

Description
ROD CLEANING 7.62MM BARREL GAS CYLINDER 1A TO DS CAT NO.1005-000358 DC (I) NO.23088-SA DT.19-9-95 IN FINISHED CONDITION.
Specification
ROD CLEANING 7.62MM BARREL GAS CYLINDER 1A TO DS CAT NO.1005-000358 DC (I) NO.23088-SA DT.19-9-95 IN FINISHED CONDITION.
Drawing no.
DS CAT NO.1005-000358 DC (I) NO.23088-SA
Manufacturing Technology
Testing / Inspection Facility
 70 300 संख्या   
9 ) POST AIMING MG MK-3 TO DS CAT NO.1290-000258 DC(I) 24575-SA DT.30.10.99 IN FINISHED CONDITION

[Close]

Description
POST AIMING MG MK-3 TO DS CAT NO.1290-000258 DC(I) 24575-SA DT.30.10.99 IN FINISHED CONDITION
Specification
POST AIMING MG MK-3 TO DS CAT NO.1290-000258 DC(I) 24575-SA DT.30.10.99 IN FINISHED CONDITION
Drawing no.
DS CAT NO.1290-000258 DC(I) 24575-SA
Manufacturing Technology
Testing / Inspection Facility
 70 300 संख्या   
Proceed