Items open for Registration

STEEL FLAT 6X10MM BS 970 PT.1 : 1983 GD- 070M55

BS 970 PT.1 : 1983 GD- 070M55

ST.RD.25 MM DIA IN HOT ROLLED & ANNEALED/NORMLISED CONDTION TO SPECIFICATION BS:970.PT.1 1983 GD.605M36 SEC.2. SEPARATE TEST PIECES ARE TO BE HARDENED & TEMPERED TO CONDN."V" TO ACHIEVE HARDNESS293-352 HB MACRO-ETCH TEST & NMIR TEST AS P ER ANNEXURE-A NATURE-C

SPECIFICATION BS:970.PT.1 1983 GD.605M36

CAGE ROLLER BEARING CQA/WPN/1742

AS PER TENDER NO. 160590BMPO ON E-PROC. PORTAL

STEEL FLAT 32X11MM TO SPECN: BS:970: PT-3 1991:GD.835M15 IN HOT ROLLED AND ANNEALED CONDITION REQD. FOR GUIDE FRONT LEFT

SPECN: BS:970: PT-3 1991:GD.835M15 IN HOT ROLLED AND ANNEALED CONDITION

STEEL FLAT 22X18MM SPECN. IS: 5517:1993 DESIGNATION 40 NI 6 CR 4 MO2 (REQD.FOR LINK PISTON EXTN.OF MAG 7.62MM)

SPECN. IS: 5517:1993 DESIGNATION 40 NI 6 CR 4 MO2

SECONDRY REFIND AOD/VOD QUALITY STEEL ROD 46 MM DIA CONFORMING G TO THE SPECIFICTION JSS 9510-06:2000 (REV NO.3)CODE REF "B" IN HOT ROLLED,ANNEALED AND PEELED CONDT. IN MULTIPLE OF 413MM LENGTH TEST PIECETO BE TESTED IN T-1 CONDTION.MACROET- CH TESTING TO CON IS 13015:1991 & NMIR TEST (ANNEXURE-A ENCL)

SECONDRY REFIND AOD/VOD QUALITY STEEL ROD 46MM DIA CONFORMING G TO THE SPECIFICTION JSS 9510-06:2000 (REV NO.3)CODE REF "B" IN HOT ROLLED,ANNEALED AND PEELED CONDT. IN MULTIPLE OF 413MM LENGTH TEST PIECETO BE TESTED IN T-1 CONDTION.MACROET- CH TESTING TO CON IS 13015:1991 & NMIR TEST (ANNEXURE-A ENCL)

SPECIFICATION JSS 9510-06:2000 (REV NO.3)CODE REF "B"

• Melting and Rolling

STEEL RD 45MM DIA IN HOT ROLLED & ANNELED CONDITION TO SPECN BS:970 PT-3:1991.GD.709M40 .TEST PIECE TO BE TESTED IN`V' CO NDITION

TO SPECN BS:970 PT-3:1991.GD.709M40 .

STEEL SQR 37MM TO SPECN.BS:970:PT-1:1983 GD.945M38 IN HOT ROLLED & NORMALISED CONDITION TEST PIECE TO BE TESTED IN `T' CONDTION

STEEL SQR 37MM TO SPECN.BS:970:PT-1:1983 GD.945M38

SPECN.BS:970:PT-3:1991 GD.945M38 T.P.TESTED

SPECN.BS:970:PT-3:1991 GD.945M38 T.P.TESTED

STEEL RD 12MM DIA IN ANNEALED AND COLD DRAWN CONDITION TO SPECN.BS:970.PT-I:1983 GD.817M40 OR 826M40 TEST PIECE TO TESTED AS PER ANNEXURE-A NATURE-C. (REQD.FOR EXTRACTOR PLUNGER OF MAG 7.62MM)

SPECN.BS:970.PT-I:1983 GD.817M40 OR 826M40

STEEL RD 25 MM DIA SPECN BS: 970:PT-3:1991 GD.420S29 OR 431 S29 ( REQUIRED FOR GAS REGULATOR DS CAT NO. 1005-006614)

SPECN BS: 970:PT-3:1991 GD.420S29 OR 431 S29

STEEL ROUND 19.05 MM (3/4")DIA IN HOT ROLLED & NORMALISED CONDITION TO SPECN.BS:970 PT-1:1983 GD.605M36 TEST PIECE TO BE TESTED IN 'V' CONDITION.MACRO-ETCH TEST AS PER ANNEXURE-C

SPECN.BS:970 PT-1:1983 GD.605M36

STEEL RD 22MM DIA IN HOT ROLLED AND ANNEALED CONDITION TO SPECN.BS:970 PT.1:1983 GD.817M40 OR 826M40.TEST PIECE TO BE TESTED AS PER SPECN.MACROETCH & NMIR TEST AS PER STORE DRG. CLEANLINESS TEST A SEPERATE TP TO BE HEAT TREATED TO ACHIEVE HARDNESS 45-61 HRC.T0 BE ULTRASONICALLY TESTED.(REQD.PISTON)

SPECN.BS:970 PT.1:1983 GD.817M40 OR 826M40.

STEEL ROUND 14 MM DIA IN HOT ROLLED NORMALISED CONDITION TO SPECN: BS:970: PT31:1991 GD 817 M40 OR 826 M40, TEST PEICE TO BE TESTED IN Z CONDITION

SPECN: BS:970: PT31:1991 GD 817 M40 OR 826 M40,

STEEL STRIP 3.5MM THICK X 32MM WIDE TO SPECN. BS:5770:PT-II:1981 GD.70 OR 80 IN COLD ROLLED & ANNEALED CONDITION MACRO-ETCH TEST & NMIR TEST AS PER ANNEXURE-C A SEPARATE T.P.TO BE QUENCHED ^ TEMPERED TO ACHIEVE HARDNESS 73-76 HRA

SPECN. BS:5770:PT-II:1981 GD.70 OR 80 IN COLD ROLLED & ANNEALED CONDITION

STEEL FLAT TO SPECIFICATION BS:970:PT.3:1991: 070 M55 SIZE 45MM X 50MM IN FORGED AND ANNEALED CONDITION

SPECIFICATION BS:970:PT.3:1991: 070 M55 SIZE 45MM X 50MM IN FORGED AND ANNEALED CONDITION

STEEL ROUND 18MM DIA TO SPECN:BS:970:PT 1:1983 GD 605 M36 OR GD 606 M36

SPECN:BS:970:PT 1:1983 GD 605 M36 OR GD 606 M36

ST.FLAT 70X38MM TO SPECN IS:6603-2001;DISIGNATION X12CR12 OR X20CR13.

SPECN IS:6603-2001;DISIGNATION X12CR12 OR X20CR13.

STEEL ROD 30MM DIA. TO SPECN.BS:970:PT.1:1983 GD.070M55 CONDN.'S' (REQD. FOR FLASH HIDER )

SPECN.BS:970:PT.1:1983 GD.070M55 CONDN.'S'

STEELROD 44+0.0/-0.50MM DIA.IN CUTLENGTHOF415+2.5/-00MM TOSP ECN.JSS:9510-06-2000,REV.NO.3 CODE REF.BIN T3 CONDITION WITH COMPOSITION RESTRICTED S%-0.010 MAX.P%-0.015 MAX.& (S+P)%-0. 022 MAX.FOR MAG 7.62MM.BARREL FOR OTHER PARAMETERS AS PER QA I NO.QA-1/QA/14 (Q.AOD/VOD)

SP ECN.JSS:9510-06-2000,REV.NO.3 CODE REF.BIN T3 CONDITION

STEEL RD 45MM DIA IN HR & NORMALISED CONDN.TO SPECN.BS:970PT -3:1991.GD.070M55.TEST PIECE TO BETESTED AS PER SPECN.MATL. SHOULD ALSO SATISFY THE TEST AS PER ANNX."C".A SEPERATE TEST PIECES IS TO BE QUENCHED * TEMPERED TO ACHIEVE HARDNESS40-45 HRC. (REQD.FOR-BARREL LOCKING NUT )

SPECN.BS:970PT -3:1991.GD.070M55.

STEEL FLAT 25X32MM(1"X1-1/4")TO SPECN.BS:970:PT-1:1983 GD.080M40 IN HOT ROLLED & NORMALISED CONDITION. MATL TO BE TESTED AS PER ANNEXURE-C (REQD.FOR BAND FRONT SIGHT OF MAG 7.62MM)

SPECN.BS:970:PT-1:1983 GD.080M40

RAW MATERIAL OF BARREL ST. ROD 40.0 MM DIA TO SPEC. JSS:95 10-06-2012 CODE REF .B. T - I COND. WITH COMPOSITION N RESTRICTION S%=0.01 MAX., P%=0.015MAX & (S+P)%=0.022MAX. NMIR TEST AS PER CLAUSE 8.3.4 & APPENDIX 'B' OF SPEC. JSS:95 10-06-2000(REV.NO.3), QUALITYAOD/VOD

SPEC. JSS:9510 -06-2012 CODE REF .B. T - I COND.

• Melting & Rolling

ST FLAT SIZE 22 X 60MM IN HOT ROLLED & ANNEALED CONDITION TO SPECIFICATION BS:970:PT 1:1983 : GD 708M40

SPECIFICATION BS:970:PT 1:1983 : GD 708M40

ST.RD.38MM DIA IN HOTROLLED & ANNEALED COND.TO SPECN.IS:4432 -1988 DESIGNATION.13 NI 13 CR 3 LATEST ISSUE TEST PIECE TO B E BLANK CARBURISED HEATTRATED & TESTED FOR COREPROPEERTIES I N ACCORDANCE W/RELEVANT CLAU.OF SPECN 'NI'SPOT TEST TO BE DO NE 100

SPECN.IS:4432 -1988 DESIGNATION.13 NI 13 CR 3 LATEST ISSUE

ST WIRE SPG 15 SWG(1.829MM)DIA TO SPECN IS:4454:PART1:2001 GRADE "DM" REQUIRED FOR SPRING RETURN OUTER OF 9MM CARBINE.

SPECN IS:4454:PART1:2001 GRADE "DM

ST WIRE SPG 1.626MM (16 SWG)DIA TO SPECN IS:4454 PART1;2001 GRADE 'DM'.

SPECN IS:4454 PART1;2001 GRADE 'DM'.

STEEL RD 38MM DIA IN HOT ROLLED AND NORMALISED CONDITION TO SPECN. IS:5517 -1993, DESIGNATION 40 C8 TEST PIESE TO BE TES TED AS PER SPECIFICATION.MACRO ETCH TEST AND NMIR TEST. (LENGTH OF BAR MUST BE 300 MM.)

SPECN. IS:5517 -1993, DESIGNATION 40 C8

STEEL RD 19.00MMDIAINHOT ROLLED & NORMALISED CONDITION TO SPECN.IS:5517-1993 DESIGNATION 40C8 LATEST ISSUE TEST PIECE BE TESTED AS PER SPECN.THE MATERIAL SHOULD ALSO SATISFY THE TESTS AS LAID DOWN IN THE ANNEXURE.

SPECN.IS:5517-1993 DESIGNATION 40C8 LATEST ISSUE

STEEL RD 32MM DIA IN HOT ROLLED AND NORMALISED CONDITION TO SPECN.IS-1875-2005 DESIGNATION C8 CLASS 2 LATEST ISSUE TEST PIECE TO BE TESTED AS PER SPECN. MATERIAL SHOULD ALSO SATISF Y THE TESTS AS LAID DOWN IN THE ANNEXURE "A" NATURE "C".

SPECN.IS-1875-2005 DESIGNATION C8 CLASS 2 LATEST ISSUE

STEEL TO BS:970 PT-1:1983 835M15 OR EN-39B SQUARE 90MM

STEEL TO BS:970 PT-1:1983 835M15 OR EN-39B SQUARE 90MM

STEEL FLAT 40+0.6MMX50+0.8MM&IN CUT LENGTH OF 70+1.00MM TO SPECN .BS:970:PT.1:1983 GD.817M40.WITH RESTRICTIONS OF S%=0.0 1MAX.,P%=0.015MAX &(S+P)%=0.022MAX IN H.R. AND ANNEALED CONDITION. TEST PIECE TO BE TESTED IN "T" CONDITION.OTHER PARAMETERS AS PER-QAI NO.-QA-1/QAI/15

STEEL FLAT 40+0.6MMX50+0.8MM&IN CUT LENGTH OF 70+1.00MM TO SPECN .BS:970:PT.1:1983 GD.817M40.WITH RESTRICTIONS OF S%=0.0 1MAX.,P%=0.015MAX &(S+P)%=0.022MAX IN H.R. AND ANNEALED CONDITION. TEST PIECE TO BE TESTED IN "T" CONDITION.OTHER PARAMETERS AS PER-QAI NO.-QA-1/QAI/15

• Melting Rolling

STEEL ROD 32.00MM DIA-0.1MM HOT ROLLED PEELED BAR IN EXACT LENGTH OF 760MM +2MM EACH PIECE TO SPECN.BS 970 PT:1:1983. GD 835 M15 WITH RESTRICTION OF S%=0.01 MAX,P%=0.015MA X,(S+P)%=0.022MAX,VACUAM DEGASED & DEVOID OF UNDESIRABLE ELEMENT AL.,V,W ETC. ACCEPTANCE CRITERIAS PER:QAINO.QA-1/QAI/15

STEEL ROD 32.00MM DIA-0.1MM HOT ROLLED PEELED BAR IN EXACT LENGTH OF 760MM +2MM EACH PIECE TO SPECN.BS 970 PT:1:1983. GD 835 M15 WITH RESTRICTION OF S%=0.01 MAX,P%=0.015MA X,(S+P)%=0.022MAX,VACUAM DEGASED & DEVOID OF UNDESIRABLE ELEMENT AL.,V,W ETC. ACCEPTANCE CRITERIAS PER:QAINO.QA-1/QAI/15

• Melting and Rolling

STEEL ROUND 25 MM DIA.TO SPECN.IS 5517-1993 GD.42 CN4 MO2 LRS-63MM. IN HOT ROLLED AND ANNEALED CONDITION. TEST PIECE TO BE HEAT TREATED TO "T" CONDITION & MECHANICAL PROPERTIES TO BE CHECKED. ( REQD.FOR CYLINDER GAS )

SPECN.IS 5517-1993 GD.42 CN4 MO2 LRS-63MM

STEEL ROUND 27 MM TO SPECN.IS:5570-1993 DEGIGNATION 55C8 IN ANNEALED & COLD DRAWN CONDN. (FOR SLEEVE LOCKING BIPOD).

SPECN.IS:5570-1993 DEGIGNATION 55C8

STEEL STRIP 3.5MM THICK X140MM WIDE TO SPECN. STEEL BS:1449 PT:1:1972 GRADE HR 43/25. STRAIGHTENED & IN STD. CUT LENGTH

SPECN. STEEL BS:1449 PT:1:1972 GRADE HR 43/25.

ST.FLAT 40X16MM TO SPECN.IS:5517-1993 DEGIGNATION 40 C8(FOR BRACKET FRONT HAND GUARD).

ST.FLAT 40X16MM TO SPECN.IS:5517-1993 DEGIGNATION 40 C8(FOR BRACKET FRONT HAND GUARD).

• Melting & rolling

ST.STRIP SIZE:- 1.8MM THICK X270MM WIDE X1600MM LONG TO SPECN. IS:7226-1974 GRADE C-40, COLD ROLLED & ANNEALED CONDN. NOTE:- GRAIN DIRECTION SHOULD BE ALONG THE LENGTH.

SPECN. IS:7226-1974 GRADE C-40,

ST SHEET 1.00X1250X2500MM DD QUALITY. (COLD ROLLED ) TO SPECIFICATION IS:513-(LATEST ISSUE).

SPECIFICATION IS:513-(LATEST ISSUE).

Body Upper to Drg. No. IQX-1008 in F/C DC.No. 36852-A Dated 23.09.02

Body Upper to Drg. No. IQX-1008 in F/C DC.No. 36852-A Dated 23.09.02

IQX-1008

INVESTMENT CASTING OF TRIGEER SK-5378R REQUIRED FOR REVOLVER MK-III D.A. NO. 24/09, DT. 16.07.09

AS PER DRG.

SK-5378R

I.C. of Cocking Bracket for JVPC DRG. No. SK JVPC-598

AS PER DRG.

No. SK JVPC-598

IC Bracket to Drg.No. SK-3706/34*7 Duly Heat Treated To:T Condition

IC Bracket to Drg.No. SK-3706/34*7 Duly Heat Treated To:T Condition

IC Bracket to Drg.No. SK-3706/34*7 Duly Heat Treated To:T Condition

• Machining and Assy.

INVESTMENT CASTING FOR LUG TRIPOD AS PER DRG.NO.SK-3706/15.

AS PER DRG.

SK-3706/15.

• machining & assy.

INVESTMENT CASTING OF HINGE COVER TO DRG. NO-SK-4760/05*1.

AS PER DRG.

SK-4760/05*1.

INVESTMENT CASTING DOVETAIL TO DRG. NO. SK-3706/35.

AS PER DRG.

NO. SK-3706/35.

INVESTMENT CASTING FOR HOUSING REAR SIGHT AS PER DRG NO.SK-3647*1.

INVESTMENT CASTING FOR HOUSING REAR SIGHT AS PER DRG NO.SK-3647*1.

DRG NO.SK-3647*1.

• Investment Casting

INVESTMENT CASTING OF BRACKET FOR TR1POD. AS PER DRG. NO.SK-3706/3. DA NO.204/2K DT.06.12.2K.

AS PER DRG.

NO.SK-3706/3. DA NO.204/2K DT.06.12.2K.

INVESTMENT CASTING OF GAS REGULATOR TO DRG.NO. SK-3706/8*

AS PER DRG.

SK-3706/8*

INVESTMENT CASTING OF LEVER CHANGE TO DRG. NO. SK-3706/9*2

AS PER DRG.

SK-3706/9*2

INVESTMENT CASTING OF SLIDE COCKING HANDLE TO DRG.NO. SK-3706/16*2

AS PER DRG.

SK-3706/16*2

IC OF SLIDE (RETRACTING) DRG.NO. SK-5797 FOR LMG 5.56MM

AS PER DRG.

DRG.NO. SK-5797

I.C FEED ARM TO DRG.NO.SKM-769*2

I.C FEED ARM TO DRG.NO.SKM-769*2

DRG.NO.SKM-769*2

• INVESTMENT CASTING

AS PER DRG.

AS PER DRG.

AS PER DRG.

AS PER DRG.

INVESTMENT CASTING TO DRG NO.SKM-775*1 FOR STOP CARTRIDGE OF MAG 7.62MM

AS PER DRG.

SKM-775*1

I.C. PAWL FEED FRONT DRG.NO. SKM-740*2 FOR MAG GUN

AS PER DRG.

SKM-740*2

I.C BODY COCKING SLIDE SKM-738*4

I.C BODY COCKING SLIDE SKM-738*4

SKM-738*4

• Investment Casting

INVESTMENT CASTING TO DRG NO. SKM-755*4. FOR CATCH CARRYING HANDLE FOR MAG GUN

AS PER DRG.

SKM-755*4.

DRG. No. SK-5375R*3D

DRG. No. SK-5375R*3D

DRG NO SK-5375R*3 D.A. NO. 35/08 , DT. 12-05-08

HAMMER (IC) FOR REVOLVER MK-III DRG NO SK-5377R*1,

HAMMER (IC) FOR REVOLVER MK-III DRG NO SK-5377R*1,

DRG NO SK-5377R*1

AS PER DRG

AS PER DRG

AS PER DRG.

AS PER DRG.

DRG. NO.SK-3665*

INVESTMENT CASTING TO DRG.NO.SK-3411*1(IC FOR CAM CYLINDER) D.A. NO. 10/10 DT. 11-5-10

AS PER DRG.

DRG. NO. SK-3411*1 D.A. NO. 10/10 DT. 11-5-10

INVESTMENT CASTING OF TRIGEER SK-5378R REQUIRED FOR REVOLVER MK-III D.A. NO. 24/09, DT. 16.07.09

AS PER DRG.

SK-5378R

AS PER DRG.

AS PER Drg. No. SK-3527 FOR 9 MM CARBINE

Drg. No. SK-3527

STEEL INVESTMENT CASTING FOR CAP TO DRG NO. SK-3870*2 OF 9MM CARBINE 1A1

STEEL INVESTMENT CASTING FOR CAP TO DRG NO. SK-3870*2 OF 9MM CARBINE 1A1

SK-3870*2

INVESTMENT CASTING FOR BLOCK TOP TO DRG.NO.SK-3868*.

As per DRG.

DRG. NO.SK-3868*

Investment Casting to DRG No. SK-3713*1 for Guard Back Sight

Investment Casting to DRG No. SK-3713*1 for Guard Back Sight

DRG No. SK-3713*1

INVESTMENT CASTING FOR LEVER LOCKING TO DRG.NO.SK-3715*

As per Drg.

DRG.NO.SK-3715*

STEEL SHEET SIZE 4.00 MM +0.30 MM X 1000 MM X 2500 MM LENGTH TO SPECIFICATION IS:2062 - 2011 GRADE E 350A

SPECIFICATION IS:2062 - 2011 GRADE E 350A

PIPE TO DRG NO. 1015-002001

PIPE TO DRG NO. 1015-002001

DRG NO. 1015-002001

PIPE TO DRG. NO. 4710-040701

PIPE TO DRG. NO. 4710-040701

DRG. NO. 4710-040701

• PIPE TO DRG. NO. 4710-040701

PLATE, PIPE UNION REAR TO DRG. NO. IAN 279 SA

PLATE, PIPE UNION REAR TO DRG. NO. IAN 279 SA

DRG. NO. IAN 279 SA

PIPE TO DRG. NO. BOF - 6146108

PIPE TO DRG. NO. BOF - 6146108

DRG. NO. BOF - 6146108

PIN CONTACT FOR CRADLE ASSY TO DRG. NO. 5315-000987

PIN CONTACT FOR CRADLE ASSY TO DRG. NO. 5315-000987

DRG. NO. 5315-000987

SPINDLE TO DRG. NO. CM-3342

SPINDLE TO DRG. NO. CM-3342

DRG. NO. CM-3342

LEVER TO DRG. NO. DS CAT - 1015-000771

LEVER TO DRG. NO. DS CAT - 1015-000771

DRG. NO. DS CAT - 1015-000771

NUT, CLAMP (MACHINING) TO DRG. NO. 5310-006006

NUT, CLAMP (MACHINING) TO DRG. NO. 5310-006006

DRG. NO. 5310-006006

PIN SHOULDER TO DRG. NO. 5315-001003

PIN SHOULDER TO DRG. NO. 5315-001003

DRG. NO. 5315-001003